SD-User
[Top] [All Lists]

Re: [SD-User] Yaesu FT-100 CAT with SD

To: Allan G Duncan <allan.duncan@allanduncan.co.uk>, sd-user@contesting.com
Subject: Re: [SD-User] Yaesu FT-100 CAT with SD
From: g3wyw via SD-User <sd-user@contesting.com>
Reply-to: g3wyw <g3wyw@btinternet.com>
Date: Wed, 10 Oct 2018 16:23:43 +0100
List-post: <mailto:sd-user@contesting.com>
Allan,
Wow FT100 a blast from the past.
Have you tried 021.925 or 021925 for 15m
I'll have a look at the CAT commands.
73 Paul G3WYW 



Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: Allan G Duncan 
<allan.duncan@allanduncan.co.uk> Date: 10/10/2018  16:00  (GMT+00:00) To: 
sd-user@contesting.com Subject: [SD-User] Yaesu FT-100 CAT with SD 
I am having issues with SD V20.10 while connected to my Yaesu FT-100 (it is
a backup radio for me). I had not tried this transceiver on previous
versions, so I am unsure if it is a new problem.

 

Radio is connected to COM3 using a USB/Serial adapter with FTDI chipset.
This cable and comport allocation works OK on my K3 with SD.

 

It will initially read the radio frequency OK (say 3522 KHz). Changing band
with either SD or on the radio itself - it will go to strange frequencies -
note that the FT-100 covers 1.8MHz to 440MHz.

 

Typing "28025" into the call field puts the radio on 280.250MHz. Typing
"14195" puts the radio on 141.950MHz. Typing "15M" puts the radio on
212.100MHz.

 

Unfortunately, this makes the FT-100 in combination with SD only usable in a
single band contest.

 

Is there something I am doing incorrectly?

 

Regards,

 

Allan

GM4ZUK

_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
<Prev in Thread] Current Thread [Next in Thread>