You need at least the following;
8mhz 250 cw
8mhz 500 cw
And if you want the other rx to work on cw mode, put a 500 cycle in it also.
I like to run 250/250 when its crowded
And then 250/500 for 'normal condx'
Don't bother with the 2 khz phone filter. You can do the same with
shift/width adjustments.
Dan/W4NTI
----- Original Message -----
From: "Macie, Gordon" <gmacie@xmmcorp.com>
To: <secc@contesting.com>
Sent: Tuesday, December 18, 2001 12:20 PM
Subject: [SECC] Yeasu FT-1000MP
> I just recieved a new/used FT-1000MP... What should I buy in the way of
> filters ?.. Contesting SSB and CW. I have a chart from www.qth.net/inrad.
I
> assume i must need filters in sub rcv also
>
> Gordon Macie
> KS5M/4
>
> --
> SECC on the Web: http://secc.contesting.com/
> Submissions: secc@contesting.com
> Administrative requests: secc-REQUEST@contesting.com
> Problems: owner-secc@contesting.com
>
--
SECC on the Web: http://secc.contesting.com/
Submissions: secc@contesting.com
Administrative requests: secc-REQUEST@contesting.com
Problems: owner-secc@contesting.com
|