TRLog
[Top] [All Lists]

[TRLog] Need help with Keying/PTT/Paddle interface

Subject: [TRLog] Need help with Keying/PTT/Paddle interface
From: W4EF@pacbell.net (Michael Tope)
Date: Mon, 25 Jan 1999 16:37:01 -0000

Good point - the darlington adds one diode drop to 
the Vce saturation voltage! Exactly how low do the
modern transceivers need to go anyway? One would think 
that pulling them down to 1 volt would do the trick.
Guess not, or is the strobe driver adding more voltage
drop as Tree's post suggested?

Mike, W4EF...........

----------
From:   George Cutsogeorge[SMTP:w2vjn@rosenet.net]
Sent:   Tuesday, January 26, 1999 12:00 AM
To:     Michael Tope
Subject:        Re: [TRLog] Need help with Keying/PTT/Paddle interface

The darlington has more drop than a single transistor and may
cause trouble with some radios.  A better choice is a power MOS
FET as it draws no input current and has very low output drop.  A
suitable type is the VN10KM or the 2N7000.  They are designed to
saturate with a TTL input level.

George
W2VJN


-----Original Message-----
From: Michael Tope <W4EF@pacbell.net>
To: 'Pete Smith' <n4zr@contesting.com>
Cc: 'TRLOG' <TRLOG@contesting.com>
Date: Monday, January 25, 1999 7:11 AM
Subject: RE: [TRLog] Need help with Keying/PTT/Paddle interface


>
>Has anyone tried a darlington pair (beta multiplier)
>in place of the keying transistor? This should draw
>very little current from the interface.
>
>Mike, W4EF
>
>----------



--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html


<Prev in Thread] Current Thread [Next in Thread>