Belwo is my common.dat file.
AUTO QSO NUMBER DECREMENT = TRUE
BAND MAP ENABLE = TRUE
BEEP ENABLE = TRUE
CODE SPEED = 25
CW SPEED FROM DATABASE
DISPLAY MODE = COLOR
DVP ENABLE = FALSE
KENWOOD RESPONSE TIMEOUT = 25
KEYER OUTPUT PORT = PARALLEL 1
MOUSE ENABLE = TRUE
MY STATE = MN
PRINTER ENABLE = FALSE
PTT ENABLE = TRUE
RADIO ONE BAUD RATE = 4800
RADIO ONE CONTROL PORT = SERIAL 1
RADIO ONE NAME = TS870-S
RADIO ONE TYPE = TS870
SCP MINIMUM LETTERS = 3
AUTO DUPE ENABLE CQ = TRUE
SIMULATOR ENABLE = FALSE
CW TONE = 800
CW ENABLE TRUE
> -----Original Message-----
> From: owner-trlog@contesting.com [mailto:owner-trlog@contesting.com]On
> Behalf Of Gil Baron W0MN
> Sent: Thursday, December 16, 1999 5:06 PM
> To: AA/Trlog@Contesting. Com; geoiii@kkn.net
> Subject: RE: [TRLog] TS-870
>
>
>
> I am set to 4800 with 2 stop bits. I am using a fully wired cable.
> It fails if I wire it the way the documentation talks about. I must us a
> fully wired cable because I also use it with Logic 5 and other
> programs that
> require fully wired cables.
> I realize this makes it impossible to use the serial port for push to talk
> but I think that is not good practice to use the same port in any case. I
> use my other port for push to talk with other programs and I use VOX with
> TRLOG.
>
>
> > -----Original Message-----
> > From: George Fremin III [mailto:geoiii@kkn.net]
> > Sent: Thursday, December 16, 1999 2:58 PM
> > To: Gil Baron W0MN
> > Subject: Re: [TRLog] TS-870
> >
> >
> > Gil Baron W0MN writes:
> > >
> > > George;
> > > I have an 870 and interface it with very little problem.
> > > Sometimes it seems that it might be nicer if it were a faster
> > response to
> > > frequency change but that is the polling he does so doubt can
> > do anything.
> > > It takes about 3/4th second usually, not all that bad.
> > > I am using a very simple interface, just as shown in the
> > documents and no
> > > optical or anything.
> > >
> >
> > What baud rate do you have it set for - what menu setting?
> >
> > Are you usign a fully wired cable.
> >
> >
> >
> >
> > --
> >
> > George Fremin III "I'm talkin' 'bout that outlaw X
> > Johnson City, TX It's cuttin' through the air.... "
> > K5TR (ex.WB5VZL)
> > 830/868-2510 -- "Heard it on the X"
> > geoiii@kkn.net -- ZZ Top
> > http://www.kkn.net/~k5tr
>
>
> --
> FAQ on WWW: http://www.contesting.com/trlogfaq.html
> Submissions: trlog@contesting.com
> Administrative requests: trlog-REQUEST@contesting.com
> Problems: owner-trlog@contesting.com
> Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
>
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|