Oh, one other thing. TR's EIGHT BIT PACKET PORT is defaulted to FALSE, but
it must be set to TRUE for WinTelnetX ... at least in my setup.
Good Luck,
Ed - W0YK
> -----Original Message-----
> From: trlog-bounces@contesting.com
> [mailto:trlog-bounces@contesting.com]On Behalf Of Dave Hachadorian
> Sent: Wednesday, October 22, 2003 7:52 AM
> To: trlog@contesting.com
> Subject: [Trlog] wintelnetx com port setup
>
>
> I'm trying to get telnet spots into
> tr from a second computer which is
> running Wintelnetx. tr is
> not reading the spots. On the second
> computer, Wintelnetx has its output
> com port set up as 2400 baud, 7E1, cts/rts.
>
> On the logging computer, TR is set up
> with the default packet parameters.
>
> I'm pretty sure I had it set up
> that way last year and it worked
> ok, at least for incoming spots,
> but so far no joy. Any ideas?
>
> Dave Hachadorian, K6LL
> Yuma, AZ
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|