Hi Tim:
I had a problem a couple of years ago getting SERIAL PORT 5
to work on an old PC. It turns out that I had to set SERIAL
5 PORT ADDRESS. The serial port worked with other programs,
but not with TR. From the latest manual:
SERIAL 5 PORT ADDRESS
SERIAL 6 PORT ADDRESS
Values: Hex value Default: 0 (zero)
If you need to use port addresses di?erent
than the ones displayed by the TR PORT command,
you can specify the base I/O address to use for
SERIAL 5 (or 6) with this command. If you
have set this to a legal value, you can specify
SERIAL 5 (or 6) for any of the serial port
functions.
I hope this helps.
73,
Mark, KD4D
> --- "Gennett, Timothy" <tgennett@purdue.edu> wrote:
> > I have been trying to get an add-on PCI serial card
> > to work under DOS.
> >
> > The card is a SIIG CyberSerial Dual port card.
> >
> > DOS recognizes the card, and I can use the card
> > under DOS (or a DOS Window) to key the rig for CW.
> > But, it will not control the rig (read frequency,
> > etc.) Works FB under Windows 98 with other logging
> > software.
> >
> > Is there something obvious I am missing?
> >
> > There was a recent thread here concerning the SBDVP
> > program, and a comment that SBDVP and TR would not
> > work with a PCI sound card. Had to be ICA. Could
> > there be a similar issue with a PCI serial card?
> > Can anyone recommend a PCI serial card that is known
> > to work?
> >
> > 73 de Tim, K9WX
> > _______________________________________________
> > Trlog mailing list
> > Trlog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/trlog
>
>
> __________________________________
> Do you Yahoo!?
> Protect your identity with Yahoo! Mail AddressGuard
> http://antispam.yahoo.com/whatsnewfree
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|