TenTec
[Top] [All Lists]

Advice from Scout/Argo 555/556 owners

To: <tentec@contesting.com>
Subject: Advice from Scout/Argo 555/556 owners
From: asearle@netusa.net (Art Searle)
Date: Thu, 20 Jun 1996 09:46:30 -0700
Scott Rosenfeld NF3I wrote:
> 
> When I crank the volume down to nothing, I get what I can only describe
> as a "whine" out of the speaker or headphones, maybe 500-600 Hz.  When I
> spin the knob (tune the radio) it becomes modulated.
> 
> Anyone else see this effect?  Most prominent when listening w/phones.
> 

Ten-Tec says this is normal due to the fact that the headphone jack is really
an external speaker jack. The audio output is meant to drive a speaker. They
recommend installing a pad (or make a small jumper) in you headphones. This
consists of connecting one end of a 10 ohm resistor across the stereo leads on 
the phone plug and the other to ground and a 390 to 470 ohm resistor in series
with headphone leads to the stereo phone plug.

72, de Art WU2K

-- 
72,73, de Art Searle, WU2K, Long Is., NY, ARRL Life Member
QRP-L #524, QRP ARCI #9123, NorCal pending, DXCC MX & CW HR 
NRA Benefactor Life Member, NMLRA Life Member, AMA Life Member
NRA Certified Firearms Instructor, Dale Earnhardt Fan Club

<Prev in Thread] Current Thread [Next in Thread>