About a month ago I picked up a Triton II w/ the 252 P/S that
I knew did not work. Usually not a big problem. Some of the list
members helped me with manuals and schematics for the P/S and I
already had the Triton manual.
1. Initially no DC output at all.That was a given.
2. I removed the WRONG Q1 pass transistor (was a 2N3055) and
replaced with a referenced substitute ECG 181 for the original
device, a 2N5301.
3. The SCR 2N5060 was assumed to be defective and replaced.
Now I have a solid 6 VDC??
Neither the "manual" for the 252 or the Triton provide anything beyond
the DC output of 13 VDC @ 20 Amps. IE, no supply device voltages are
given,that's a surprise.
Am I missing some data?? Any ideas on what I should look for next?
The collector of Q1 pass transistor is getting a solid 23.6VDC
scratching my noggin on why no 12VDC??
Tnx for any further info that might help track down the problem.
Mike
Le Claire, Ia
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|