TenTec
[Top] [All Lists]

[TenTec] PTO?

To: <tentec@contesting.com>
Subject: [TenTec] PTO?
From: wp1076@bingo.baynet.de (Wolfgang Peringer)
Date: Mon, 25 May 1998 17:58:21 +0200
HI Tim:
I think you will get the advice to rebuild the VFO as there is a kit
available from TenTec. I suggest before doing this try to wash out the old 
grease in the VFO (use alcohol and be careful) and use new grease. I had
the same effect on my Omni C and also on my Argosy II and the new grease
solved the problem completely. Also check the archives at the reflector.
There are a lot of postings dealing with that problem.
Best regards
Wolfgang
W.Peringer@bingo.baynet.de
DK7CY
G-QRP#8354; QRP-L#1200

----------
> Von: Tim Cook <timcook@erinet.com>
> An: tentec@contesting.com
> Betreff: [TenTec] PTO?
> Datum: Montag, 25. Mai 1998 13:59
> 
> I recently purchased a real nice Omni-C and ext VFO at a real fair price
and
> am tickled to have been able to get it. There is just one small problem I
> would like some advice on.  The PTO in the Omni is real smooth, (doesn't
> stick or move backwards when you let go of it), but on cw signals, and
only
> noticable on cw signals, there is SOMETIMES a "warble" on the cw note as
you
> tune through it. It stabilizes when you stop tuning.  It doesn't do it
all
> the time and seems more pronounced in one portion of the band, but not
sure
> about that. The ext vfo is fine. Is there anything I can try  to fix the
> problem short of doing a pto rebuild? The radio is a joy to use in every
> other respect, just this little nagging problem. I had forgotten how nice
> the QSK was on the Ten Tec rigs.
> 
> thanks for any info
> Tim
> NZ8J
> P.S. still looking for a 500hz filter for it....   :)
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>