Mike wondered:
"The CLOCK is not set to the correct time! Yep, you
guessed it, that one I haven't figured out yet....and it is
really annoying me! Darn thing is set to a time that
isn't even close...."
Mike,
In the VI+, you go to USER MENU 1.
Select CCd. Enter the hours and minutes
beginning with a zero if necessary. The clock
will begin counting when the lst digit is
entered.
How do you get to the USER MENU's?
Press and hold the LOCK button for about 2 seconds.
The readout will ask, "choose". Press either 1, 2, or 3.
Use the main tuning knob to scroll though the items.
Then use the UP/DOWN arrow buttons to change the
status of a selected item. To switch to another item,
press the LOCK button once again, then select the
new item. To exit, press the LOCK button twice.
Now I am surprised you didn't figure all that out
without a manual!! Hi.
73, Jim, KH7M
On the Garden Island of Kauai
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|