Bob I have been using a program called KAM-PRG. KAM-PRG is public domain
software designed for CW,RTTY,ASCII & AMTOR. It is a DOS program with
very low system requirements but runs fine under WIN95. I have tried
many KAM terminal programs and this was one of best. I have no internet
address for availability but I can give you authors snail mail address
and/or can e-mail it to you as an attachment (it's not very big).
Author:
Clermont Computer Consultants
29 N. Ravenwood Drive
Cape May Court House, NJ 08210
(609) 624 0076.
--
|--------------------------|
| Anthony A. Luscre |
| KA8NRC |
| Stow, Ohio |
|--------------------------|
Robert Weingaertner wrote:
> Hi gang,
>
> I run a Kantronics KAM (the original with some upgrades) with my
> Paragon I for the digital modes. I've run it with an old PC
> portable (4.9 MHz 8088). Alright laugh, but running YAPP as
> a terminal its adequate.
>
> I also have an IBM Aptiva running Windows 95. Its time to switch
> the KAM over to the new PC. Can anyone recommend a decent terminal
> program that will run in Windows? I tried a couple from the QRZ
> CD ROM but I either can't unzip them or they don't work properly.
>
> OR, should I forget about RTTY, AMTOR and PACTOR and just run CW?
>
> Thanks!
>
> Bob WB2VUF
>
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|