After viewing the back of the Jupiter on the TT Web site I realized my
"spare" TT PS was not going to work, my solution was to Cut the plug
(didn't pain me a bit!)and standardize it to the ARRL standard plug
format(commonly purchased at Radio Shack), and as soon as the JUP hit the
table, I was wired to go. In my opinion, the 2 pin connector was a great
change from the 4 pin. I made an adapter for my Omni 6+ a number of years
ago and all my equipment is interchangeable. the Power off/on switch from
the Corsair and earlier, were a weak point in power switching and was glad
that the Omni series got away from that.
That's my 2 cents worth.
73, Chris KB3A
At 08:41 PM 1/3/2002, you wrote:
> the Peg is here, and
>guess what? The input power connector on the Pegasus
>is two pin, and the 962 has a 4 pin plug!! So, Ten Tec
>sells a nice 4 to 2 adapter for only $5; not a big deal.
|