Interesting....I, too, have a problem with my Omni VI which just arrived
from Ten Tec service and has the same problem it went to Ten Tec service
for.
Too busy with the Orion, I guess.
dale, kg5u
> -----Original Message-----
> From: tentec-bounces@contesting.com
> [mailto:tentec-bounces@contesting.com]On Behalf Of wo8l@att.net
> Sent: Monday, April 14, 2003 4:19 PM
> To: tentec@contesting.com
> Subject: [TenTec] OMNI V Problem
>
>
> Hi,
>
> Once again before I send my OMNI V back to Ten Tec, I am looking
> for advice.
>
> The rig does not work on SSB for very long. I can pull the plug
> back and forth
> into the socket and make it work for a small while, but SSB eventually
> disappears.
>
> I did send the rig back to Ten Tec and they repaired an "intermittent PLL
> connection." This worked for a while but not for long. I
> hesitate to send the
> rig back to them (I'll call them tomorrow after posting this
> note) because this
> problem was not repaired the last time.
>
> Perhaps the problem has to do with making the proper connection
> with the mike
> plug. I received an interesting e-mail on this.
>
> Others?
>
> 73s,
>
> Rick
>
> P.S. I am unemployed and want an unexpensive solution to this.
> WO8L
> Pfafftown, NC
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|