Earl,
If the radio is in CW mode, you can simply press PTT and it will key as you
suggested. I am working very hard right now writing my N4PY Orion Control
Program. I actually have a very early version running right now. These
little inconveniences are exactly the type of things my software will make
much easier.
Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: <k6se@juno.com>
To: <tentec@contesting.com>
Sent: Tuesday, May 13, 2003 9:10 PM
Subject: [TenTec] Orion Question
> My new Orion is scheduled to be delivered Friday, May 16th. I've
> downloaded the operating manual and cannot find anything specific in it
> about supplying a continuous transmitter output, needed for tuning up a
> linear amplifier.
>
> It appears that one way would be to put the radio in the CW mode, then
> turn off the internal keyer (straight key mode), and then push my paddle
> to the dit side. This seems to me to be a rather unwieldy way to
> accomplish amp tuning.
>
> If the radio is in the CW mode, will simply activating the PTT switch on
> the microphone accomplish the desired result?
>
> 73, de Earl, K6SE
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|