At 11:18 AM 6/12/2003 -0400, you wrote:
[...] Otherwise, I would have used Jim's idea for
making the connection....which otherwise looks great.
His cable has the exact pinouts I used and are the right ones to use.
I opted not use headers as Dave, AD6A used in his on-line article. I
took the cheap and dirty route
by soldering buss-bar wire links into the PC board holes.
I did the same.
I have the SatStat software which comes with the unit on a CD-ROM
disk. I am also assuming that no other changes are required on
the RX-340?
Nope. Just the cable from one to the other.
In other words the RX-340 is auto-detecting of the external 10 MHz time
base?
It will autodetect, and can autodetect other reference clocks (5 and 1 MHz,
IIRC) as well. Just put a cable between them.
I would suggest, though that you consider getting the GPSCON software. I
couldn't get the SatStat software to work on Win2k.
Good luck with it!
--
Eric F. Richards
efricha@dimensional.com
"The weird part is that I can feel productive even when I'm doomed."
|