Crit, I also have the same condition occur.
Thanks for the observation,
Larry W6UB
----- Original Message -----
From: "J. Crit Harley, MD, C.Ht." <jcharley@bellsouth.net>
To: <tentec@contesting.com>
Sent: Friday, October 03, 2003 6:59 AM
Subject: [TenTec] Orion Owners...try this
> Orion Owners.try this (please).
>
>
>
> 1. Set Mode to LCW
> 2. Set the Rx to VFO A and Set the Tx to VFO B (as if operating split)
> 3. Press the A>B key to equalize the frequency
> 4. Turn OFF the volume to SubRx
> 5. Leave the BW open to 1000 Hz.
> 6. Toggle the TUNE button to key the TX (do not use key and be sure
> freq is clear)
> 7. Now, according to my audio-spectrum display via MixW I lose the
> audio above 600 Hz. It certainly snds different to my ears.
> 8. Pressing the A>B button recovers the lost audio spectrum.
>
>
>
> Does this happen on your Orion? I have the latest firmware. If I reverse
> the split it does not happen. It is not due to high SWR becuz it happens
> after I have already tuned the antenna but use the TUNE button again. I
> don't think this affects the SubRx audio output range. I just got this
> Orion and am still learning how to operate it.
>
>
>
> Tnx for any help, suggestions or comments.
>
>
>
> 73/Crit/K4BXN
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|