TenTec
[Top] [All Lists]

[TenTec] Why is the Jupiter better?

To: tentec@contesting.com
Subject: [TenTec] Why is the Jupiter better?
From: "Joe" <n9vx@myway.com>
Reply-to: n9vx@myway.com, tentec@contesting.com
Date: Wed, 7 Jul 2004 10:58:27 -0400 (EDT)
List-post: <mailto:tentec@contesting.com>
I have owned both the Jupiter and the IC-746PRO and would pick the Jupiter. My 
mode of operation is ssb rag chew, so can not address cw, contesting, digital 
modes and etc.

The 746PRO does have digital filters on receive and you can change the filter 
shape (sharp or soft), it has treble and bass EQ control for transmit and 
receive, the transmit audio is very punchy using compression without distorting 
the audio, you can change the transmit bandwidth in 3 steps from 2.8k to 2.0k. 
This radio has a much clearer display screen than the Jupiter (wish TT would 
take a look) and it has 6 and 2 meters. I personally would not use the free 
noisy (fan) power supply. You would have the transmit failure problem to worry 
about.

The Jupiter/Pegasus is the quietest receiver I have ever had, have had the 
FT-1000MP, TS-870, IC-746, IC-746PRO, IC-756PRO, IC-775DSP. The Jupiter is 
quieter with no NR than the 756PRO is with NR turned on. You can reduce the 
receive filter bandwidth and the noise just rolls off of a weak signal, on some 
dsp radios (TS-870) reducing the filter width has no change on receiver noise. 
For my needs I would not want the antenna tuner in the Jupiter, the Jupiter 
will put out full power at 3:1 or better, so the tuner is just something else 
to hassle with.

My present station is a Pegasus and a IC-756PRO. I love to try various radios, 
but do not plan on ever not having a Jupiter or Pegasus.

So... this is my opinion.

Good luck,  Joe  N9VX

_______________________________________________
No banners. No pop-ups. No kidding.
Make My Way your home on the Web - http://www.myway.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>