Here's a new one.
I go to the menu to change the EXT T/R Delay so my amp won't be trying to
QSK between every CW character. Menu > Tx > EXT T/R Delay 1. I am not using a
keying loop.
When I rotate the Multi knob to change the delay, the screen goes blank. The
receiver still works but the transmitter does not.
Reset does not clear it. RAM reset does not clear it. Each Ram reset
requires a second off/on cycle of the radio because when it first comes on
there
is no audio.
If I RAM reset three or four times, eventually it will come back and work.
Changing T/R Delay 2 works fine every time but I have nothing hooked up there.
This is a major bug - I should be able to change the T/R delay without going
through several major reboots of the radio. How about it ditsnbits -- will
you say something other than a canned reply? Am I crazy? Am I the only one?
Talk to us.
K4ia "Buck"
Fredericksburg, Virginia USA
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|