Mr Castro seems determined that I continue to get the Ten Tec reflector even
though I have continually requested it be stopped. Does anyone have any
suggestions to "UNSUBSCRIBE" ? I get way to many messages to read even
though they should be batched.
----- Original Message -----
From: "JAMES HANLON" <knjhanlon@msn.com>
To: "tentec" <tentec@contesting.com>
Sent: Wednesday, April 30, 2008 12:32 PM
Subject: [TenTec] Fw: balanced antenna tuner ( or how to do things on
thecheap- tribute to Geoff's drive for cost effect
----- Original Message -----
From: JAMES HANLON<mailto:knjhanlon@msn.com>
To: mjlowensteijn@hotmail.com<mailto:mjlowensteijn@hotmail.com>
Sent: Wednesday, April 30, 2008 10:30 AM
Subject: Re: [TenTec] balanced antenna tuner ( or how to do things on the
cheap- tribute to Geoff's drive for cost effect
Marinus,
Thanks for the reference to the S-Match. That's a neat development from
my beloved, link-coupled, parallel-tuned circuit tuner. I filed it for
future reference.
Jim Hanlon, W8KGI
----- Original Message -----
From: Marinus Loewensteijn<mailto:mjloewensteijn@hotmail.com>
To: tentec@contesting.com<mailto:tentec@contesting.com>
Sent: Wednesday, April 30, 2008 2:44 AM
Subject: [TenTec] balanced antenna tuner ( or how to do things on the
cheap- tribute to Geoff's drive for cost effect
Geoff
In your drive for equipment on the cheap I like to draw your attention to
the S-Match as promoted by PA0FRI:
http://www.xs4all.nl/~pa0fri/ATU/Smatch/smatcheng.htm<http://www.xs4all.nl/~pa0fri/ATU/Smatch/smatcheng.htm>
It uses only three components, tunes very easily and can handle both
balanced as unbalanced antennas. Unfortunately you may have to build a
different version for 160m than for 10m because minimum capacitance values
do have an impact.
It should be the ideal beginner's project, in particular if I see prices
asked for "commercial" antenna tuners and which often contribute a
considerable expense towards establishing a station.
By the way - even with the older tentec gear like the Omni-C one does not
need a SWR meter since that is already built in to the rig. (And
"standalone" SWR meter's prices are through the roof for such a simple
piece of equipment)
Enjoy, 73, Marinus, ZL2ML
_________________________________________________________________
Connect to the next generation of MSN Messenger
http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline<http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|