TenTec
[Top] [All Lists]

Re: [TenTec] OT SWR VS Power Loss

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] OT SWR VS Power Loss
From: Steve Hunt <steve@karinya.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 07 Jul 2008 18:29:12 +0100
List-post: <mailto:tentec@contesting.com>


Dr. Gerald N. Johnson wrote:
I never said the resonance condition included changing the radiation
resistance to 50 ohms. Only that that the phase angle of the load
becomes zero, e.g. current and voltage are in phase at the feed point or
alternatively that the energy stored in the inductance equals the energy
stored in the capacitance and that they swap every half cycle.
Jerry,

Sorry - I can't agree.

The tuner never made the phase angle of my load zero - the current through the resistor/capacitor combination, and the voltage across them were still out of phase, even when the tuner matched the load to 50 Ohms. What did become zero was the phase angle of the combined tuner/load.

I think we're playing with words, but I think it's misleading to use words which suggest that the tuner has in some way "altered the load" - it hasn't.

Steve


<Prev in Thread] Current Thread [Next in Thread>