Make sure you have MMTTY set up correctly in the Misc setup and that you
have the correct soundcard selected in the soundcard setup menu. I think
the Tx Port in the Misc setup has to be on Sound??
I can't verify this for sure as I use FSK (which I highly suggest with the
O2 as this sets the filters and passband automatically for RTTY) and have
the COM-TxD (FSK) box checked.
Dick K8ZTT
----- Original Message -----
From: <k1zn@cox.net>
To: <tentec@Contesting.com>
Sent: Thursday, April 09, 2009 7:20 PM
Subject: [TenTec] Orion RTTY & Soundcard
I am setting up my Orion for Digital direct from Laptop soundcard. Using
TT Aux Cable, and MMTTY, have white and yellow audio cables installed.
Print RTTY FB on Laptop. Can't XMT. in XMT mode, ORION does not enter XMT
mode. Settingss in MENU are: VOX VOX TRIP = 75%; Anti-VOX = 50% (have
tried down to 5%); VOX Hang =0.25sec/ SSB - AUX INPUT GAIN = 72 (have gone
dn to 25); TX AUDIO SOURCE = BOTH; h/w Mic Gain = 0.5db / AUDIO left/right
= main
Any suggestions???
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|