[TenTec] OMNI VI - Low Power output

TenTec

[TenTec] OMNI VI - Low Power output

To:	TenTec@contesting.com
Subject:	[TenTec] OMNI VI - Low Power output
From:	Dennis Ashworth <dennis@ashworth.org>
Reply-to:	dennis@ashworth.org, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date:	Sat, 09 Jan 2010 11:20:10 -0800
List-post:	<tentec@contesting.com">mailto:tentec@contesting.com>

The power output of my OMNI has dropped to around 30 watts, as measured 
on the OMNI front panel and an external power meter. The collector 
current (as displayed to front panel meter) is about 15 A.  SWR 
indication on the front panel is incorrect, indicating 3:1 into a dummy 
load -(1:1 indicated on the external power meter).

Any ideas?

Tnx
Dennis, K7FL
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TenTec] OMNI VI - Low Power output, Dennis Ashworth <= Re: [TenTec] OMNI VI - Low Power output, Dr. Gerald N. Johnson Re: [TenTec] OMNI VI - Low Power output, Mike Bryce Re: [TenTec] OMNI VI - Low Power output, CSM\(r\) Gary Huber - AB9M

Previous by Date:	[TenTec] ALC adjustments, Henry Mackey
Next by Date:	Re: [TenTec] OMNI VI - Low Power output, Dr. Gerald N. Johnson
Previous by Thread:	[TenTec] ORION II development ??, dl2rdh
Next by Thread:	Re: [TenTec] OMNI VI - Low Power output, Dr. Gerald N. Johnson
Indexes:	[Date] [Thread] [Top] [All Lists]