TenTec
[Top] [All Lists]

Re: [TenTec] Pegasus 550

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Pegasus 550
From: davkozy@comcast.net
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 1 Apr 2010 16:36:52 +0000 (UTC)
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>

Thanks all for your suggestions!!   I did find a source for replacement relays 
www.onlinecomponents.com  that had them in stock. ($1.77 ea. + Shipping)  I'm 
waiting for them to arrive.  
Hope to find the time to install now with the nice weather setting in. 



Anyone have any tricks for easy desoldering? 



Dave KB9EPL 



----- Original Message ----- 
From: "phil g" <trapperpg@earthlink.net> 
To: geraldj@weather.net, "Discussion of Ten-Tec Equipment" 
<tentec@contesting.com> 
Sent: Monday, March 29, 2010 2:52:24 PM GMT -06:00 US/Canada Central 
Subject: Re: [TenTec] Pegasus 550 

I never noticed the pull-in voltage.  I had that link bookmarked in my 
pegasus files as a replacement.  I think it came from this list.  I no 
longer have my 550, but maybe someone out there is adventurous and could do 
a voltage check. 

There is a 5v version listed, apparently also made of unobtainium. 

http://www.newark.com/panasonic-ew/als2b05tw/miniature-power-relay/dp/45M7085 

n4zsa 
----- Original Message ----- 
From: "Dr. Gerald N. Johnson" <geraldj@weather.net> 
To: <tentec@contesting.com> 
Sent: Monday, March 29, 2010 2:36 PM 
Subject: Re: [TenTec] Pegasus 550 


> The part number indicates a 12 volt coil. 
> 
> 73, Jerry, K0CQ 
> 
> On 3/29/2010 12:21 PM, Denton wrote: 
>> I used to have a Peggy, and one of the relays on the band pass filter 
>> board 
>> failed...if I remember right, the relay coils for both input and output 
>> of 
>> the filter are wired in series...I replaced mine with two new relays that 
>> had 6 volt coils. 
>> ----- Original Message ----- 
>> From: "phil g"<trapperpg@earthlink.net> 
>> To: "Discussion of Ten-Tec Equipment"<tentec@contesting.com> 
>> Sent: Monday, March 29, 2010 11:04 AM 
>> Subject: Re: [TenTec] Pegasus 550 
>> 
>> 
>>> Here is a link to the relay.  Also avail. from Ten Tec. 
>>> http://www.newark.com/jsp/search/productdetail.jsp?SKU=45M7086 
>>> 
>>> Fairly straight forward to replace.  Unsolder the old, solder in the 
>>> new. 
>>> 
>>> n4zsa 
>>> ----- Original Message ----- 
>>> 
> _______________________________________________ 
> TenTec mailing list 
> TenTec@contesting.com 
> http://lists.contesting.com/mailman/listinfo/tentec 

_______________________________________________ 
TenTec mailing list 
TenTec@contesting.com 
http://lists.contesting.com/mailman/listinfo/tentec 
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>