I have a Tektronics 2215 60 mhz scope with dual probes to go with it that is
excess to my needs,that I would like to sell at a very reasonable cost if you
are interested. I think I got this scope in the mid to late 1990s then later on
I got a 100 mhz scope and do not need 2. I will sell it along with 2 10db
leader probes for $150 plus shipping of about $20 to $25.I can supply pictures
if needed.
--- On Sat, 7/10/10, Michael Goins <wmgoins@gmail.com> wrote:
> From: Michael Goins <wmgoins@gmail.com>
> Subject: [TenTec] Slightly OT - oscilloscope question
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Date: Saturday, July 10, 2010, 12:00 PM
> Reworking the workbench to be a
> little more builder-oriented and a little
> less as a fix-it area, so I am considering a scope for the
> first time. I've
> used them very little in the past, but I'm relatively sure
> that a 50 MHz
> would suffice for me here as I don't operate higher than 6
> meters. I do know
> that short probes with minimal capacitance can be
> important, but I need some
> help with knowing how much to get without overdoing or
> under doing it.
>
> What's out there that would work for joe average ham as a
> decent scope? Cost
> is always a factor, as is relative ease of use and learning
> curve (English
> major here). Single trace? Dual? Lots of bells and
> whistles? Few? Particular
> brands? Brands and models to stay away from?
>
> Especially fragile to ship, or should I stick to looking
> close to home?
>
> Mike, k5wmg
> Pipe Creek, Texas
> Fast cars, slow boats, big dogs, old trucks, little radios,
> and summers off
> to write
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|