One other thing, Art. If it happens that a filter pin is loose in its
receptacle, it can be tightened by squeezing the pin *very gently* with
pliers, so it becomes slightly flattened. Then re-insert.
Careful not to over-do, else it won't fit the socket.
Phil C. Sr.
k4dpk
----- Original Message -----
From: "Art Trampler" <atrampler@att.net>
To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Sent: Saturday, August 21, 2010 10:40 AM
Subject: Re: [TenTec] Intermittent Omni VI RX Falloff (Art Trampler)
Thanks for the replies.
I will try the various suggestions in order of descending effort and see
when (if) the fix arrives.
Art
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|