Jerry,
I'm not familiar with switch on back of rig for AUX RX...only on front of
rig next to AGC.
Am I missing something?
Funny how many (different) answers one question got!
Art
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Dr. Gerald N. Johnson
Sent: Thursday, August 19, 2010 10:21 PM
To: tentec@contesting.com
Subject: Re: [TenTec] Intermitten Omni VI RX Falloff
Aux RX switch on the back of the radio. Needs cleaning.
73, Jerry, K0CQ
On 8/19/2010 10:15 PM, Art Trampler wrote:
> Hey All,
>
>
>
> On my Omni VI Opt 3, the RX periodically drops off 20 to 25db, using a
> 6db/S-unit scale. If I wiggle the RF gain it can pop back, or if I go key
> down for one ?dih.? I haven?t tried simply closing the PTT to restore (as
> opposed to any transmission) but I think that would also do it.
>
>
>
> I?d think ?Relay? or ?Diodes? if it only popped back with closing the
> PTT/sending; I?d think bad solder joint if it was only the RF gain.
What?s
> interesting is that the RX is not lost, just significantly
> reduced/attenuated.
>
>
>
> Your thoughts?
>
>
>
> Thanks,
> Art
>
>
>
> Art Trampler, KØRO
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.851 / Virus Database: 271.1.1/3082 - Release Date: 08/19/10
13:35:00
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|