TenTec
[Top] [All Lists]

[TenTec] 565 Power setting question.

To: tentec@contesting.com
Subject: [TenTec] 565 Power setting question.
From: WB2RHM - Ben Antanaitis <WB2RHM@ARRL.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 21 Aug 2010 07:36:24 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
How does the 'power level' setting work in the 565?
When the ptt is activated, does the output power start at 0 watts and 
increase to the set value, with the set value representing a 'wall' 
that the power does not exceed?  Or does the power briefly start at 
100% and then throttle back to the set value?  The meter seems to 
have a quick 'overshoot' when the signal is started,

Thanks, 73,
Ben - WB2RHM

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] 565 Power setting question., WB2RHM - Ben Antanaitis <=