Through trial and error I've discovered it's actually the other way
around. "Sub-Rx Slot 1" in the menu controls the slot toward the front of
the Orion, marked F1 on the board and F3 on the cover. I also realize I
might have a very early production filter cover that was subsequently
corrected and that would explain my confusion.
73, Barry N1EU
On Tue, Dec 9, 2014 at 11:44 PM, Barry N1EU <barry.n1eu@gmail.com> wrote:
> Can an RX-366 owner out there confirm that filter slot F1 is toward the
> rear of the Orion and slot F3 is toward the front of the Orion? That's how
> it's labeled on the filter retaining cover but the silkscreen on the board
> itself where the filters plug in has it the other way around.
>
> Thanks & 73,
> Barry N1EU
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|