Hi Mike,
You can use either the ACC1 or the regular key jack. The output of an
external keyer looks just like a straight key to the radio.
I'd probably use the key jack since the required cable is just a simple
audio cable. I don't see any benefit to using the ACC1 port.
The Winkeyer will plug in to your computer via USB and that will allow your
programs to key the radio. Computer control (i.e. changing mode / frequency
/ etc on the radio) would require another connection to the computer (USB
port on the Eagle to a USB port on your computer).
Hope that helps. The Eagle looks like a great rig. I'd love to own one of
those some day!
73,
-Josh WA7FPV
On Wed, Jun 14, 2017 at 8:57 PM, Michael Tortorella <w2iy@verizon.net>
wrote:
> GE to the list,
> I am about to put my new Eagle 599 on the air for the first time in the
> next
> week or so and I am curious about how to use an external keyer. On page 18
> of the manual it indicates that you plug an external keyer into the rear
> apron with a mono 1/8" phone plug. Then on page 23, it appears you need to
> use pins 2 and 3 of the ACC1 connector for external keyer input. I want to
> run a K1EL winkeyer usb3 with computer control. Which of these options is
> correct?
> Thanks and 73
> Mike W2IY
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|