TenTec
[Top] [All Lists]

Re: [TenTec] Noise blanker recommendations

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Noise blanker recommendations
From: John Geiger <af5cc2@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 23 Oct 2017 11:21:11 -0500
List-post: <mailto:tentec@contesting.com>
Thanks Bernie,  Do they affect receiver performance much when engaged,
other than reducing the noise?

73 John AF5CC

On Mon, Oct 23, 2017 at 11:03 AM, Bernie Skoch via TenTec <
tentec@contesting.com> wrote:

> John,
>
>
> I have never seen a PERFECT noise blanker, but the one on my Orion II
> comes close.  It has both "hardware" and software settings, and the DSP is
> pretty decent too.
>
>
> Best of luck.
>
>
> Bernie K5XS
>
>
>
> -----Original Message-----
> From: John Geiger <af5cc2@gmail.com>
> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> Sent: Mon, Oct 23, 2017 10:49 am
> Subject: [TenTec] Noise blanker recommendations
>
> I was making a rather serious (given my small antennas) effort today in the
> Illinois QSO Party and had to deal with this intermittent noise I have here
> for pretty much the entire contest.  It is a raspy, hash type noise that
> will be on for 2 or 3 seconds, then will end, but come back every 20 to 30
> seconds.  I  have figured out it is not in my house, and doesn't seem to be
> power line noise.  At one time I thought I had localized it to a house
> about 4 houses to the west of me, but the house is now unoccupied, but the
> noise is still there.
>
> Anyways, I was using the Kenwood TS950SD which I just picked up, and it is
> a great rig with lots of receiver tools.  The noise blanker pretty much
> knocked out the noise, but it also produced plenty of IMD products when the
> band got busy and put a raspy sound on many of the signals, so I was having
> to turn the NB off and on trying to make the signals as best as I could
> with this noise.  Even engaged the attenuator a few times on 40m which
> helped a little, but also weakened signals.
>
> I have had a slight windfall recently and can afford to get a newer, better
> rig if I want.  Are there any recent Ten Tecs that have noise blankers that
> take out many different types of noise, but don't mess with the receive
> signals and receiver dynamic range?  I wonder if the DSP based noise
> blankers are better?  An older rig would be ok also if it would meet those
> criteria.
>
> 73 John AF5CC
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>