Anyone know of a good article in a magazine past or present on installing a
4 square
vertical system for the lower bands 160 - 40 meters?
I would like to see info on first putting in 2 verticals then upgrading it
to 4 later.
Been looking at the butternut hf-2v with 160 meter add-on. This will cost
a fortune.
May just home brew the whole thing. May just end up doing 40 / 80 meters
only.
Would like to get all the info I can for this. I have plenty of room and
not such a
fat wallet hi hi. Thanks to all.
BTW my 160 m wire inverted L , bent at 95 ft with 4 radials is working!!!
73's....Steve....NW9G
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|