To: | flood@ixi.net, topband@contesting.com |
---|---|
Subject: | Re: Topband: impedance transformer windings |
From: | "CHARLES HUTTON" <charlesh3@msn.com> |
Date: | Tue, 28 Oct 2003 00:43:38 +0000 |
List-post: | <mailto:topband@contesting.com> |
Hi Steve: One little problem is that you can't reduce things to "inductance per turn" since that is not linear. The inductance varies as the square of the number of turns. When I do the calculations, the numbers are 336 uH for the antenna winding using the 4:1 rule. That requires 6.3 turns on the antenna winding and 1.4 turns on the receiver winding. I'd make that with 9 and 2 turns respectively. The extra turns will help just a tiny bit as the insertion loss with greater than 4:1 ratio will fall maybe .05 dB. On the other hand, the high end of the passband may come in just a little but you're way outside of a flag's frequency range that it does not matter. The transformer is likely to be flat past 30 MHz even with the extra turns. Your other choice is to use a normal 73 or 77 core. You'll be better off with the BN core even with the slight amount of "extra" turns. Chuck From: "Steve Flood" <flood@ixi.net> To: <topband@contesting.com> Subject: Topband: impedance transformer windings Date: Mon, 27 Oct 2003 14:04:27 -0700 _________________________________________________________________ Concerned that messages may bounce because your Hotmail account has exceeded its 2MB storage limit? Get Hotmail Extra Storage! http://join.msn.com/?PAGE=features/es _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Topband: impedance transformer windings, Steve Flood |
---|---|
Next by Date: | Re: Topband: impedance transformer windings, amdx |
Previous by Thread: | Topband: impedance transformer windings, Steve Flood |
Next by Thread: | Re: Topband: impedance transformer windings, amdx |
Indexes: | [Date] [Thread] [Top] [All Lists] |