Hello,
just finished to rebuilt my two wires 250 m beverage .
>From the feed point I have two coaxial cables arriving to the shack, I was
>considering to built a switch to go from one direction to the other and maybe
>also add an MFJ -1026 phasing box to do some null-steering or improve noise
>cancellation.
I have two questions :
-is it worth the effort ??
-I measured the ports impedance of the MFJ-1026 and found that VSWR is really
bad , like to know if somebody has made modifications to that equipment to
improve it ?
Thanks
73 Jacques F6BKI
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|