Topband
[Top] [All Lists]

Re: Topband: Shunt Fed Question

To: "Brian Sarkisian, KG8CO" <cqkg8co@yahoo.com>
Subject: Re: Topband: Shunt Fed Question
From: Tree <tree@kkn.net>
Date: Sun, 7 Dec 2008 11:56:36 -0800
List-post: <topband@contesting.com">mailto:topband@contesting.com>
On Sat, Dec 06, 2008 at 03:18:30PM -0800, Brian Sarkisian, KG8CO wrote:

> I have 125 ft of Rohn 45 with a 4 element KLM 40 meter beam on top.
> 
> 1. At what height would you attach the top of the gamma match?

This might not be the answer you are hoping for - but I think your
tower is too long electrically to work well on 160.  I have never 
heard of someone having a tower that high that really worked well.

It is was about 70 feet tall - it would probably be great.

I think one thing you might think about is isolating part of the 
tower at the bottom - say - say between 40 and 60 feet using a
trap (see ON4UN's book or I can describe it if you want).

This would put the "ground" of the gamma match up at 60 feet in the
air - and then you can use elevated radials that are 1/4 wave 
long (hopefully you have room for a few of them).  You can probably
avoid using a gamma and use the N4KG reverse feed method.

This would essentially give you a ground plane antenna which should
work very well.  

If you do make this work with just a gamma match at the ground - and
it proves to be an effective antenna - I will eat my words!!  I just
haven't seen this work for the people that I know that have tried it.

73 Tree N6TR
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>