Carl:
I marveled at the number of ferrite cores as well when I first read the
article. Re-reading it I think I found that he lived very close to an AM
broadcast station which seemed to have common mode signals on everything.
I think he went a bit overboard -- at least from the point of view of
someone who does not have that much common mode interference. To eliminate
the common mode stuff he generated I would think a lot fewer cores would be
required.
I am still thinking about how best to pick up small amplitude common mode
signals and look at them with a spectrum analyzer. That, I would think,
might really give one a good idea about just how effective the ferrite core
chokes are. Regrettably, my test equipment is in Idaho and I am in Minnesota
this month so I can do nothing but speculate. Maybe in February I can see
what my common mode issues are, if any,
I do use type 31 cores and have measured the effects of 1,2 3 and 4 turns
through the DX Engineering large beads. They are very good at choking RF on
80m with 3 turns and even better with two beads in series each with three
turns of coax through it. In series means that each bead forms a choke and
the chokes are in series not that the same turns go through both of the
beads.
73, Tod, K0TO
> -----Original Message-----
> From: topband-bounces@contesting.com
> [mailto:topband-bounces@contesting.com] On Behalf Of Carl Clawson
> Sent: Sunday, January 03, 2010 12:52 PM
> To: Topband Reflector
> Subject: Topband: A ham who uses his own weight in ferrites
>
> I stumbled across this article on common mode noise somewhere:
>
> http://www.yccc.org/Articles/W1HIS/CommonModeChokesW1HIS2006Apr06.pdf
>
> Looking at the extensive choking at this station, I am
> astounded. For example, I've never heard of anyone choking
> entire mains branches at the breaker panel (his Fig. 14).
> Maybe I just haven't paid enough attention.
> But...
>
> Not that I plan to start knocking holes in my walls and
> filling junction boxes with ferrite any time soon, but I'm
> curious how far others have had to go.
>
> 73 & thanks,
> Carl WS7L
>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|