* ”I've not heard anyone talk about doing a proper clamp, and then protecting
the proper clamping by silver soldering over it all. The obvious disadvantage
is that changing out the connection becomes interesting, as in replacing the
ground rod.
Not sure how you reached that conclusion. I’m referring to a silver-soldered
bypass of a mechanical clamp with copper strap. The strap starts some inches
away from the clamp, then reforms around it. The clamp remains unsoldered and
connected as per NEC and the manufacturer’s connection procedure.
Paul, W9AC
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|