To: | topband@contesting.com |
---|---|
Subject: | Topband: active antenna height |
From: | "Gary Smith" <Gary@ka1j.com> |
Reply-to: | Gary@ka1j.com |
Date: | Thu, 25 Aug 2016 22:00:54 -0400 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
I've decided to make the plunge and buy one of the 8 element active arrays for 160M-40M. Looking at the price for the antenna kit, it's just too much considering the cost of the electronics, so I need to roll my own. I was thinking of getting the Telescoping Aluminum Tubing that comes in 6' lengths from Texas Towers; .375", 5" & 6.25". If I slide each inside 6", that'll come to a 17' tall element. Is that sufficient height? Would adding another 2-3 feet make any difference with these kind of active antennas? 73, Gary KA1J _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: A letter imploring asmateur to "get involved", Tree |
---|---|
Next by Date: | Topband: WTB - Active Antenna, Gary Smith |
Previous by Thread: | Topband: A letter imploring asmateur to "get involved", James Rodenkirch |
Next by Thread: | Re: Topband: active antenna height, Richard (Rick) Karlquist |
Indexes: | [Date] [Thread] [Top] [All Lists] |