When I had a 2 acre 80 meter 4 sqr raxial field up in Wyoming, this was
strongly discouraged due to cancellation of currents, and went with the
traditional 120 1/4 wave radials using a copper busline to to solder the
radials in the center so they would not criss cross each other.
Get Outlook for Android<https://aka.ms/ghei36>
________________________________
From: Topband <topband-bounces@contesting.com> on behalf of W0MU Mike Fatchett
<w0mu@w0mu.com>
Sent: Saturday, January 27, 2018 11:55:10 AM
To: topband@contesting.com
Subject: Topband: Adding chicken wire or mesh on top of radial field
I have some 6ft wide chicken wire I can roll out on top of my existing
radial field for 160. Does anyone have an idea what this might do?
W0MU
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|