To: | topband@contesting.com |
---|---|
Subject: | Topband: Measure dipole on ground to get VF of BOG. |
From: | Mikek <amdx@knology.net> |
Date: | Sat, 2 May 2020 15:57:59 -0500 |
List-post: | <mailto:topband@contesting.com> |
I laid down 260ft of wire as a dipole on the ground, it is resonant at
1190kHz.
I calculate this as a VF of 0.685, my calculation is actually 0.315 but
I don't think that's right,
so I subtracted from 1. Can someone post the proper formula to calculate
the VF using Resonant frequency and Length.
260ft = 79.248 Meters Frequency is 1190kHz. Thanks, Mikek KF4ITA _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Topband: Measure dipole on ground to get VF of BOG., Mikek |
---|---|
Next by Date: | Re: Topband: Measure dipole on ground to get VF of BOG., Don Kirk |
Previous by Thread: | Re: Topband: Measure dipole on ground to get VF of BOG., Jim Brown |
Next by Thread: | Re: Topband: Measure dipole on ground to get VF of BOG., Don Kirk |
Indexes: | [Date] [Thread] [Top] [All Lists] |