Why reinvent the wheel? VaporWrap was designed exactly for
this purpose, is easy to use, you can buy a bunch and keep it
stored for many years with no degradation, is uv resistant, and
does a helluva good job. This is the better mousetrap!
de KL7HF
----------
> From: Mike <no6x@inreach.com>
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] Oxidized R7-what to do?
To: <towertalk@contesting.com>
> Date: Sunday, April 19, 1998 6:26 PM
>
> > Vapor wrap is a material (typcially butyl rubber) that keeps the
> >vapor/moisture out of a connector joint. CoaxSeal is a cheap imitation
but
> can
> >perform the same function - it you don't apply directly to the
connectors,
> >that is.
>
> What about Scotch 88 then scotch coat over that, have not had water or
> anything else get into that, however it is awful messy.
>
> Mike
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|