Hi Kevin,
You can buy the crimp tool from Tessco < tessco.com >.
Here's the description:
Manufacturer- Times Microwave
Model # - HX4 W/DIES
Tessco SKU # - 21271
HX4 crimp tool for crimping connectors on LMR400 and LMR600 cables. Includes
both dies. Other dies available.
List price $520.00
GL
Dwayne KG4ADM
<<
The tower is up, the C-4XL built, and its time to raise the antenna. My
challenge now is I'm finding it more difficult to find a tool to crimp the
compression sleeves on LMR-600 connectors than I had anticipated. My
company has tools for LMR-400 and I had incorrectly assumed that we had
something that would work. I have contacted several local radio
communications companies, but haven't found anyone with a tool that will
crimp the .610 (I believe) sleeve. The connector package says to use a .810
hex crimp. Does anyone have any ideas on alternative tools that might do the
trick?
Thanks,
Kevin. >>
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|