Steve, et al
Sorry I didn't make myself clear. What I was asking about was the
set-screw that holds the bearings in the race. Should it be locked to
prevent movement?
Tnx agn, John W7AG
> Is it necessary to secure the TB3 set screw with loctite before
> installing the bearing on the mast?
No. There is a locking nut on the bolt anyway. It only rotates at 1
RPM
so not much danger of it coming loose.
Cheers,
Steve K7LXC
TOWER TECH
_______________________________________________
Towertalk mailing list
Towertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|