Towertalk
[Top] [All Lists]

[Towertalk] Raised Guy Stays

To: <towertalk@contesting.com>
Subject: [Towertalk] Raised Guy Stays
From: na4m@arrl.net (Phil Duff)
Date: Wed, 26 Jun 2002 04:16:11 +0000
At 23:10 6/25/2002 -0400, Jim White wrote:
>check scrap yards when sourcing - it is a heck of a lot cheaper -found some
>nice ones rusting was able to obtain for a song once upon a cycle....as hams
>we need not be exactly critical in what we want but should someone have
>something similar ham ingenuity will prevail!

Yep - check the scrap yards before shopping for new "I" beams.  In either 
case - get the scrap/steel yard to have a torch man cut one end of each "I" 
beam at about a 45 deg angle. Then after you drill holes just inside the 
angle cut you have a built-in guy wire equalizer plate to attach turnbuckles.

73 Phil NA4M

-. .- ....- --   -. .- ....- --   -. .- ....- --   -. .- ....- --   -. .- 
....- --
Phil Duff NA4M     na4m@arrl.net   Georgetown, Texas  



<Prev in Thread] Current Thread [Next in Thread>