send an e mail to Wyatt at M2 and ask him. He designed the KT34XA.
I think his e mail is wyatt@m2inc.com
He's one of the good guys.
73, Bruce K1MY
----- Original Message -----
From: <Cqtestk4xs@aol.com>
To: <Towertalk@contesting.com>
Sent: Wednesday, July 31, 2002 2:22 PM
Subject: [Towertalk] KLM Tribanders
> I am in the process of building stacks with various KT 34s and KT 34XAs
that
> I have acquired and have been rebuilding. I am planning on stacking them
> using the Stackmatches by WX0B.
>
> Most of the 4:1 baluns are either not marked with the typical + and -
> markings that are usually appear on the KLM baluns. In addition, the one
> previously installed KT 34XA is at 65 feet and is inaccessable to check
any
> +/- markings.
>
> Someone told me a while back that in stacking the KLMs it was imperative
to
> keep the + on the same side for the entire stack. Is this so, and if it
is
> what is the reason for doing so? I know you can check the balun with the
MFJ
> 259 to determine which side is which and plan to do so but does it really
> make a difference?
>
> Bill K4XS
> _______________________________________________
> Self Supporting Towers, Wireless Weather Stations, see web site:
http://www.mscomputer.com
> Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
> any weather station price.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|