Towertalk
[Top] [All Lists]

[TowerTalk] Re: Antenna element vibration damping - How

To: <towertalk@contesting.com>
Subject: [TowerTalk] Re: Antenna element vibration damping - How
From: ve6jy@freenet.edmonton.ab.ca (VE6JY Don Moman)
Date: Sat Aug 9 15:02:52 2003
elements made from the .065 wall aluminum don't seem to exhibit this
tendency.  A little thicker than the normal .058 (the stuff that costs 4
times as much) and designing them to have a bit of droop - works for the
many OWA stlyle yagis here, none with ropes, and no/minimal vibration
either.

73 Don
VE6JY


----- Original Message -----
From: David Robbins K1TTT <k1ttt@arrl.net>
To: 'Jan Erik Holm' <sm2ekm@telia.com>; <towertalk@contesting.com>
Sent: Saturday, August 09, 2003 3:53 PM
Subject: RE: [TowerTalk] Re: Antenna element vibration damping - How


> > Why use poorly designed antennas in the first place,
> > ropes in the elements just fixes a poor design. Sure
> > if you get those poorly designed antennas for free
> > but I wouldn?t pay money for them. Proberly designed
> > elements doesn?t need ropes in them.
> > Also with rivets it makes it difficult to dismantle
> > elements if you ever need to.
> >
> > 73 gl Jim SM2EKM
>
> Can you clue us all in on how to build elements that don't vibrate?
>
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
>
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>