Towertalk
[Top] [All Lists]

[TowerTalk] Heights acme screw drive and motor, new in box, for sale

To: <towertalk@contesting.com>
Subject: [TowerTalk] Heights acme screw drive and motor, new in box, for sale
From: "Richard (Rick) Karlquist (N6RK)" <richard@karlquist.com>
Date: Tue, 11 May 2004 09:02:07 -0700
List-post: <mailto:towertalk@contesting.com>
For sale, Heights acme screw drive and Dayton 6Z403
gear motor new in box, purchased 2001.  This is the
newer 1 1/4 inch size that will typically lift 64
feet of tower.  It comes with hardware to retrofit
to the old hinge plates that originally used 1 inch
acme screw.

Also, old Dayton gear motor for pre-1995 screw drive.
Well weathered.  If there is sufficient interest, I will test
it to determine condition.

Make offer.

Rick N6RK

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Heights acme screw drive and motor, new in box, for sale, Richard (Rick) Karlquist (N6RK) <=