All,
Have a 55 foot heavy-duty crank-up tower (HDX-555)and planing to mount a 4
element 20 meter monobander on a 35 foot boom (M2 20M4DX).
I'd like to mount the antenna with the tower tilted over. The idea is to use a
ladder to reach the mast and stand the monobander on it's rear and slide it
onto the mounting plate.
An alternative is to mount it with the elements facing the ground. Either way,
I still need to get to the mast and both the elements and boom are about the
same length.
Would like to mount the boom-truss while tilted over as well, but not sure if
it's possible to adjust for proper tension while tilted over.
Any suggestions?
73, Tony KT2Q
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|