Your tuner/transmitter/amplifier will not know you're using 75 ohm
feedline IF you tune the output FOR 75 ohms impedance.
As for the antenna ... if you adjust the feedpoint match ... you can
MAKE it a 75 ohm antenna and feed it directly with the hardline.
Why are WE, the hams, so hung-up on making everything 50 ohms impedance?
Those 50:75 ohm transformers are generally a waste of time.
If you think this isn't a possibility, make a 75 ohm dummy load and tune
into it. You'll need a 75 ohm SWR meter [does bird make a 75 ohm
wattmeter?] and you will find you CAN tune your amp/rig/tuner for a 75
ohm load.
Just my 2 kopeks.
Don
N8DE
Gedas wrote:
> Hi everyone. I was wondering if someone could recommend an easy and elegant
> method that would allow me to use a bunch of 7/8" 75 ohm hardline I have. My
> antennas on 2 of 3 towers require over 270' runs and I would like to use this
> very nice hardline. On VHF and UHF I built custom 1/4 wave transformers
> which have worked perfect for years but for my tribander that approach will
> obviously not work. Any ideas?
>
> 73,
> Gedas, W8BYA
>
> online image gallery at http://gedas.cc
> e-mail address at w8bya@w8bya.com
> web page at http://www.w8bya.com
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|