Towertalk Mailing List (date)

Towertalk Mailing List (date)

[Thread Index] [Top] [All Lists]

June 30, 2005

Re: [TowerTalk] Climbing safety, K7LXC, 23:28
Re: [TowerTalk] Tower Identification, K7LXC, 22:53
Re: [TowerTalk] ...Compressed Air Driven Tower, Jim Lux, 22:47
[TowerTalk] Tower Identification, John & Peggy, 20:48
Re: [TowerTalk] San Jose zoning re: antennas, K2EK, 20:22
[TowerTalk] Climbing safety, Alan NV8A (ex. AB2OS), 15:34
Re: [TowerTalk] Tower Identification, Keith Dutson, 15:19
Re: [TowerTalk] Tower Identification, NØTA -- Russ Kaelberer, 14:55
Re: [TowerTalk] Interaction and loaded elements, Jim Lux, 13:46
Re: [TowerTalk] W2TTT, Keith Dutson, 13:40
Re: [TowerTalk] Interaction and loaded elements, TexasRF, 13:26
Re: [TowerTalk] Interaction and loaded elements, Jim Lux, 12:58
Re: [TowerTalk] Mid-sized beam and 80M vertical suggestions, Phil Camera, 12:45
[TowerTalk] Any Tower Talkians near Santa Fe?, Paul Reiter, 12:37
[TowerTalk] Mid-sized beam and 80M vertical suggestions, Peter Dougherty (W2IRT), 12:19
Re: [TowerTalk] W2TTT, Jerry K3BZ, 11:46
Re: [TowerTalk] Tower Identification, Keith Dutson, 11:15
Re: [TowerTalk] Tower Identification, bob finger, 11:00
Re: [TowerTalk] Interaction and loaded elements, Tom Rauch, 10:55
Re: [TowerTalk] Tower Identification, Reicher, James, 10:50
[TowerTalk] W2TTT, K4SB, 10:43
[TowerTalk] Tower Identification, Keith Dutson, 10:38
[TowerTalk] New ON4UN 4 square Antenna Paper now available on the web!, Tim Duffy K3LR, 10:28
[TowerTalk] Tri-Ex TM358 Skyneedle, Stuart Johnston, 10:13
[TowerTalk] NW3Z 40 meter yagi ?, Dave Fuller, 10:08
[TowerTalk] Interaction and loaded elements, Dave Fuller, 10:03
[TowerTalk] ...Compressed Air Driven Tower, Roger Parsons, 07:47
Re: [TowerTalk] ...Compressed Air Driven Tower, Ian White GM3SEK, 02:53
Re: [TowerTalk] ...Compressed Air Driven Tower, Jim Lux, 00:33
Re: [TowerTalk] ...Compressed Air Driven Tower, JC Smith, 00:22

June 29, 2005

Re: [TowerTalk] ...Compressed Air Driven Tower, Wes Attaway (N5WA), 23:43
[TowerTalk] ...Compressed Air Driven Tower, Ed Weber, 20:48
Re: [TowerTalk] Volts/meter calculation, Jim Lux, 16:54
[TowerTalk] Volts/meter calculation, Bill Ogden, 16:20
[TowerTalk] Tower for sale, Bill Ogden, 15:42
Re: [TowerTalk] Installing a New Tower - Trylon Titan, Bob Smith, 14:38
Re: [TowerTalk] Guy detailing, jonklinkhamer, 14:12
Re: [TowerTalk] Guy detailing, Jim Lux, 13:27
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', JC Smith, 13:22
Re: [TowerTalk] Guy detailing, Phil Camera, 12:50
Re: [TowerTalk] HG-37SS Specs, Jim Lux, 12:47
Re: [TowerTalk] Guy detailing, jonklinkhamer, 12:42
Re: [TowerTalk] HG-37SS Specs, J. Hector Garcia XE2K, 12:37
Re: [TowerTalk] Testing for unbalanced parallel feedline, Tom Rauch, 12:04
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead (more), VR2BrettGraham, 11:59
[TowerTalk] HG-37SS Specs, Dale, KG4OLE, 11:30
[TowerTalk] Ignore Test, Michael Tope, 11:26
Re: [TowerTalk] Guy detailing, Jim Lux, 10:55
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead (more), VR2BrettGraham, 10:43
[TowerTalk] Simple 1:1 Guanella Balun, Mark ., 09:15
Re: [TowerTalk] Testing for unbalanced parallel feedline, Mark ., 08:56
Re: [TowerTalk] ground the dog run ??, Reicher, James, 08:54
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead (more), Steve Mendelsohn, W2ML, 07:36
[TowerTalk] need realistic comparison, Bob Pointer, 07:29
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead (more), Tom Rauch, 06:41
Re: [TowerTalk] Guy detailing, Ron Hylton, 01:00
[TowerTalk] 135 foot dipole, 300 ohm Twinlead SOLVED, Buck - N4PGW, 00:28

June 28, 2005

Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead (more), paul, 23:31
[TowerTalk] 135 foot dipole, 300 ohm twinlead (more), Buck - N4PGW, 22:47
Re: [TowerTalk] M2 Readout Loosing Pulses ?, Dick, 22:24
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Jerry K3BZ, 21:55
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Jerry K3BZ, 21:47
Re: [TowerTalk] wires in trees, Tom Osborne, 21:38
Re: [TowerTalk] Improving the Dipole/Doublet, Tom Osborne, 21:25
Re: [TowerTalk] Anyone using the old 4-1000 amps out ther?, K7LXC, 20:02
Re: [TowerTalk] Guy detailing, Jim Lux, 19:52
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead, Bob Alexander, 18:38
Re: [TowerTalk] Guy detailing, W2RU - Bud Hippisley, 18:34
Re: [TowerTalk] ground the dog run ??, David Robbins K1TTT, 18:30
[TowerTalk] ground the dog run ??, Dan Bookwalter, 18:17
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead, Tim Kass, 17:37
[TowerTalk] Yaesu G-800DXA rotor, Gene Bigham, 17:30
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead, K4SAV, 16:33
Re: [TowerTalk] Improving my dipole, Tom Rauch, 16:03
Re: [TowerTalk] Improving my dipole, Tom Rauch, 15:55
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead, Tom Rauch, 15:53
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead, K4SAV, 15:45
Re: [TowerTalk] Testing for unbalanced parallel feedline, Tom Rauch, 15:24
Re: [TowerTalk] Improving my dipole, Buck - N4PGW, 15:22
Re: [TowerTalk] Improving my dipole, Buck - N4PGW, 15:19
Re: [TowerTalk] Improving my dipole, Keith Dutson, 15:07
Re: [TowerTalk] Improving my dipole, larryjspammenot@teleport.com, 14:45
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Rick Scott, 14:23
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Paul Ewing, 14:22
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Jim Lux, 14:04
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Jim Lux, 13:56
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead, Buck - N4PGW, 13:43
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', GALE STEWARD, 13:32
Re: [TowerTalk] Anyone using the old 4-1000 amps out ther?, GALE STEWARD, 13:22
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead, Jan Erik Holm, 13:05
Re: [TowerTalk] Guy detailing, David Robbins K1TTT, 12:57
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead, Buck - N4PGW, 12:52
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Bob Shauger, 12:48
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Kelly Johnson, 12:40
[TowerTalk] Testing for unbalanced parallel feedline, Mark ., 12:38
Re: [TowerTalk] Installing a New Tower, Alan NV8A (ex. AB2OS), 12:30
[TowerTalk] Guy detailing, jonklinkhamer, 12:28
Re: [TowerTalk] wires in trees, Jim Brown, 12:24
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Jerry K3BZ, 12:15
[TowerTalk] wires in trees, Jim Jarvis, 12:07
Re: [TowerTalk] Anyone using the old 4-1000 amps out ther?, Keith Dutson, 12:05
Re: [TowerTalk] Installing a New Tower, Phil Camera, 11:54
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Kelly Johnson, 11:46
Re: [TowerTalk] Installing a New Tower, Phil Camera, 11:22
Re: [TowerTalk] Improving my dipole, Keith Dutson, 11:18
Re: [TowerTalk] Anyone using the old 4-1000 amps out ther?, Frank Hurlbut, 11:17
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', ChetMoore, 11:02
Re: [TowerTalk] Tree where base will be, K4SB, 10:42
Re: [TowerTalk] San Jose zoning re: antennas, Jim Idelson, 10:35
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Kelly Johnson, 10:31
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead, Tom Rauch, 10:18
[TowerTalk] Improving the Dipole/Doublet, Lee A Crocker, 09:08
[TowerTalk] Anyone using the old 4-1000 amps out ther?, Jack, 08:58
Re: [TowerTalk] 135 foot dipole, 300 ohm twinlead, Joe Giacobello, 08:50
[TowerTalk] 135 foot dipole, 300 ohm twinlead, Buck - N4PGW, 08:12
Re: [TowerTalk] Improving my dipole, Jan Erik Holm, 07:40
[TowerTalk] San Jose zoning re: antennas, Jim Jarvis, 04:27
[TowerTalk] dipole in trees--k3ku's dilemma, Jim Jarvis, 04:04
Re: [TowerTalk] Hanging Wires/Cutting branches, Ian White GM3SEK, 02:45
Re: [TowerTalk] Improving my dipole, Jan Erik Holm, 01:27
[TowerTalk] Tree where base will be, Jim Rhodes, 01:08
Re: [TowerTalk] Improving my dipole, Wes Attaway (N5WA), 00:30
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Jim Jones, 00:22
Re: [TowerTalk] Improving my dipole, Jim Lux, 00:15
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Kelly Johnson, 00:13

June 27, 2005

[TowerTalk] Improving my dipole, Art Boyars, 23:59
[TowerTalk] Installing a New Tower - Trylon Titan T200-96', K7LXC, 23:51
Re: [TowerTalk] A fundamental antenna question, Martin, AA6E, 23:04
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Glenn Rattmann, 19:57
Re: [TowerTalk] MonstIR install, Mike, 19:35
[TowerTalk] Rohn 45 Torque Bars, Fred Mott, 19:09
Re: [TowerTalk] Fundamental Ant. Ques., Jim Lux, 18:00
Re: [TowerTalk] A fundamental antenna question, Jim Lux, 17:16
Re: [TowerTalk] Tower placement, Jim Lux, 16:51
[TowerTalk] Yagi spacing, Barry Fox, 13:07
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Paul Ewing, 13:03
[TowerTalk] Hanging Wires/Cutting branches, Roy Thistle, 11:20
Re: [TowerTalk] A fundamental antenna question, Bob Nielsen, 11:18
[TowerTalk] Fundamental Ant. Ques., Roy Thistle, 10:46
[TowerTalk] Mixing Galvanized & Copper Ground Rods, doc, 09:47
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Paul, 07:44
Re: [TowerTalk] M2 Readout Loosing Pulses ?, Joe Reisert, W1JR, 06:59
Re: [TowerTalk] Installing a New Tower - Trylon Titan T200-96', Rick Scott, 00:40
Re: [TowerTalk] M2 Readout Loosing Pulses ?, Jim W7RY, 00:26

June 26, 2005

Re: [TowerTalk] M2 Readout Loosing Pulses ?, Dan Hearn, 22:16
[TowerTalk] A fundamental antenna question, Wes Cosand, 21:37
[TowerTalk] Installing a New Tower - Trylon Titan T200-96', Bob Smith, 21:26
[TowerTalk] M2 Readout Loosing Pulses ?, W6RU, 21:06
[TowerTalk] A fundamental antenna question, Wesley Cosand, 19:51
[TowerTalk] Cush Craft XM-240, Julio Peralta, 19:15
Re: [TowerTalk] Rohn catalogs available again, EL34GUY, 15:30
Re: [TowerTalk] Tower placement, Bill Tippett, 13:43
Re: [TowerTalk] Tower placement, Bill Axelrod, 11:59
Re: [TowerTalk] Tower placement, Rick Scott, 11:48
Re: [TowerTalk] Tower placement, Paul, 11:14
Re: [TowerTalk] Rohn catalogs available again, Bill Aycock, 08:50
Re: [TowerTalk] Rohn catalogs available again, Mirko Sibilja, 08:07
[TowerTalk] my < $100 tower cam is OTA, FireBrick, 07:28
Re: [TowerTalk] Rohn catalogs available again, Roger K8RI on Tower, 04:54
Re: [TowerTalk] Rohn catalogs available again, Bill Aycock, 00:17

June 25, 2005

Re: [TowerTalk] Rohn catalogs available again, Roger K8RI on Tower, 23:40
Re: [TowerTalk] Rohn catalogs available again, Jim Jones, 22:43
Re: [TowerTalk] Rohn catalogs available again, Steve, 21:44
[TowerTalk] Heathkit HD/HDW-1780 IntelliRotor For Sale, David Aronovitz, 14:08

June 24, 2005

[TowerTalk] Mobile program, K4SB, 23:32
Re: [TowerTalk] Guy Anchor Advise, AA6DX - Mark, 19:33
[TowerTalk] Wanted: Tailtwister Control Box, David Aronovitz, 11:55
[TowerTalk] Questions Regarding Force 12 340N/620, Randy Martin, 11:37
Re: [TowerTalk] Guy Anchor Advise, Dave, 09:20
Re: [TowerTalk] Guy Anchor Advise, Jim Lux, 09:01
[TowerTalk] HD73, Craig Clark, 07:46
Re: [TowerTalk] Guy Anchor Advise, Ian White GM3SEK, 04:02
Re: [TowerTalk] Guy Anchor Advise, Al Toothaker, 00:23

June 23, 2005

[TowerTalk] Heights Tower - Separating Aluminum from Steel, kk9a, 19:38
Re: [TowerTalk] Guy Anchor Advise, Jim Lux, 19:05
[TowerTalk] Guy Anchor Advise, K2EK, 18:34
Re: [TowerTalk] Hang wires...., Ian White GM3SEK, 17:15
Re: [TowerTalk] Yaesu G-800DXA rotor, Gene Bigham, 16:50
Re: [TowerTalk] Alliance HD73 Rotator calibrate and mast bolt size?, Gene Bigham, 16:42
Re: [TowerTalk] MonstIR install via. helicopter, Jim Lux, 16:38
[TowerTalk] tower talk, Smokinwires, 14:59
Re: [TowerTalk] MonstIR install via. helicopter, JC Smith, 14:35
Re: [TowerTalk] folded radials, K4SB, 13:39
Re: [TowerTalk] Alliance HD73 Rotator calibrate and mast bolt size?, Dick Green WC1M, 13:31
Re: [TowerTalk] OT - FD and SSTV, Tim Holmes, 13:17
[TowerTalk] Customized Arrival Angle Statistics Software, Steve London, 12:46
[TowerTalk] one more radial question, mike l dormann, 12:41
[TowerTalk] (no subject), NØATH, 10:27
[TowerTalk] OT - FD and SSTV, Pettiet, Glenn, 09:55

June 22, 2005

[TowerTalk] Alliance HD73 Rotator calibrate and mast bolt size?, Gene Bigham, 19:05
Re: [TowerTalk] Customized Elevation Angle Statistics Software, Steve London, 17:24
Re: [TowerTalk] Customized Elevation Angle Statistics Software, Jim Lux, 17:02
Re: [TowerTalk] SPAM-LOW: MonstIR install, Scott Honaker, 13:40
Re: [TowerTalk] modeling interaction, Jim Lux, 13:24
[TowerTalk] Customized Elevation Angle Statistics Software, Steve London, 13:22
Re: [TowerTalk] modeling interaction, Jim Lux, 13:04
Re: [TowerTalk] Hang wires...., Jim Lux, 12:55
Re: [TowerTalk] MonstIR install, Jim Lux, 12:50
Re: [TowerTalk] Heights Tower - Separating Aluminum from Steel, Bill Tippett, 12:49
Re: [TowerTalk] folded radials, Tom Rauch, 12:44
Re: [TowerTalk] folded radials, Jim Lux, 12:42
Re: [TowerTalk] MonstIR install, Jim Lux, 12:38
Re: [TowerTalk] modeling interaction, K4SAV, 12:35
Re: [TowerTalk] Hang wires...., Chuck Lewis, 12:13
[TowerTalk] 4L 40m installed, David Robbins K1TTT, 10:10
Re: [TowerTalk] Hang wires...., K4SB, 09:49
Re: [TowerTalk] modeling interaction, Eric Scace K3NA, 09:26
Re: [TowerTalk] ab577 vibration, Bob Allen, 08:58
Re: [TowerTalk] Heights Tower - Separating Aluminum from Steel, Dubovsky, George, 08:29
Re: [TowerTalk] Heights Tower - Separating Aluminum from Steel, Dubovsky, George, 07:56
[TowerTalk] MonstIR install, Dennis O'Connor, 07:48
Re: [TowerTalk] Steel vs. Phillystran guys..., Pete Smith, 07:34
Re: [TowerTalk] Hang wires...., Ian White GM3SEK, 03:35
Re: [TowerTalk] Steel vs. Phillystran guys..., Roger K8RI on Tower, 01:00
[TowerTalk] Rohn catalogs available again, K7LXC, 00:28
[TowerTalk] MFJ-259b Firmware?, Rich Hallman - N7TR, 00:08

June 21, 2005

[TowerTalk] Hang wires...., Jim Jarvis, 23:17
Re: [TowerTalk] MonstIR install, JC Smith, 22:56
Re: [TowerTalk] Heights Tower - Separating Aluminum from Steel, Roger K8RI on Tower, 22:24
Re: [TowerTalk] folded radials, Tom Rauch, 22:24
Re: [TowerTalk] MonstIR install, JC Smith, 22:12
Re: [TowerTalk] MonstIR install, Frank Hurlbut KL7FH, 21:38
Re: [TowerTalk] MonstIR install, Glenn Rattmann, 21:27
Re: [TowerTalk] Heights Tower - Separating Aluminum from Steel, Jerry K3BZ, 21:05
Re: [TowerTalk] MonstIR install, Dale Martin, 20:58
Re: [TowerTalk] Heights Tower - Separating Aluminum from Steel, Bill Tippett, 20:45
Re: [TowerTalk] Heights Tower - Separating Aluminum from Steel, Cqtestk4xs, 19:50
[TowerTalk] Heights Tower - Separating Aluminum from Steel, Bill Tippett, 18:50
Re: [TowerTalk] MonstIR install, Matt Patterson, 17:37
Re: [TowerTalk] MonstIR install, ChetMoore, 17:24
Re: [TowerTalk] modeling interaction, Michael Tope, 16:48
Re: [TowerTalk] modeling interaction, Jim Lux, 15:49
[TowerTalk] Tower Wanted Oregon/SW Wash, Larry Eckstein, 15:39
Re: [TowerTalk] folded radials, Jim Lux, 15:35
[TowerTalk] modeling interaction, Dick Green WC1M, 15:28
Re: [TowerTalk] TowerTalk Digest, Vol 30, Issue 64, TOMMY HALIBURTON, 15:17
[TowerTalk] MonstIR install, kk9a, 15:06
Re: [TowerTalk] MonstIR install, K7LXC, 14:56
Re: [TowerTalk] MonstIR install, R. Kevin Stover, 14:15
Re: [TowerTalk] MonstIR install, JC Smith, 13:47
Re: [TowerTalk] MonstIR install, David Robbins K1TTT, 13:20
Re: [TowerTalk] MonstIR install, JC Smith, 13:16
Re: [TowerTalk] Steel vs. Phillystran guys...tower failure modes!, Phil Camera, 12:57
Re: [TowerTalk] Steel vs. Phillystran guys...tower failure modes!, StellarCAT, 12:44
[TowerTalk] Stacking Distance for Multiple Yagis, Bob Gates, 11:44
Re: [TowerTalk] Steel vs. Phillystran guys..., Pete Smith, 11:38
[TowerTalk] Steel vs. Phillystran guys..., StellarCAT, 11:13
Re: [TowerTalk] TowerTalk Digest, Vol 30, Issue 63, Reicher, James, 08:48
Re: [TowerTalk] folded radials, Tom Rauch, 08:25
[TowerTalk] folded radials, Dennis O'Connor, 07:49
Re: [TowerTalk] Radial Length, Tom Rauch, 06:07
Re: [TowerTalk] Radial Length, Tom Rauch, 06:07
Re: [TowerTalk] folded radials, Tom Rauch, 05:54

June 20, 2005

Re: [TowerTalk] MonstIR Beam At Dayton Hamfest, BobK8IA, 22:43
Re: [TowerTalk] MonstIR Beam At Dayton Hamfest, W3YY, 22:36
Re: [TowerTalk] Radial Length, Dudley Chapman, 22:19
Re: [TowerTalk] folded radials, VR2BrettGraham, 22:11
Re: [TowerTalk] MonstIR Beam At Dayton Hamfest, R. Kevin Stover, 21:42
[TowerTalk] ab577 vibration, Jim Jarvis, 21:36
[TowerTalk] MonstIR Beam At Dayton Hamfest, Rick Kourey (K4KL), 21:19
Re: [TowerTalk] Liberal Arts Major and Antenna Theory, Ian White GM3SEK, 18:27
Re: [TowerTalk] Liberal Arts Major and Antenna Theory, Jim Lux, 17:18
[TowerTalk] Liberal Arts Major and Antenna Theory, Lee Buller, 16:49
[TowerTalk] Fw: Screwdriver on moterhome, Jim Miller, 16:23
Re: [TowerTalk] Radial Length, Frank Latos, 15:54
Re: [TowerTalk] AB577 Vibrations, Dick Green WC1M, 15:20
[TowerTalk] Director Becoming Rotatable Dipole -- UPDATE, Tim Holmes, 14:30
Re: [TowerTalk] Radial Length, paul, 13:16
Re: [TowerTalk] Radial Length, Jim Lux, 13:04
[TowerTalk] For Sale, Gregg Seidl, 12:26
[TowerTalk] Radial Length, Don Josephs, 11:53
[TowerTalk] folded radials, Dennis O'Connor, 10:10
Re: [TowerTalk] MonstIR install, K7LXC, 09:42
Re: [TowerTalk] fiberglass tubing, donovanf, 00:47
[TowerTalk] TH7 Stack, Frank Hurlbut KL7FH, 00:45

June 19, 2005

Re: [TowerTalk] folded radials, VR2BrettGraham, 23:00
[TowerTalk] AB577 Vibrations, Dana Roode, 20:57
[TowerTalk] OT Be careful of returned mail, Roger K8RI on Tower, 15:45
[TowerTalk] VHF/UHF Switches, Jim Brown, 13:31
Re: [TowerTalk] fiberglass tubing, Glenn Rattmann, 00:28

June 18, 2005

Re: [TowerTalk] RE : To paint or not..., Merlin-7 KI4ILB, 23:40
Re: [TowerTalk] fiberglass tubing, Jim Lux, 23:29
Re: [TowerTalk] MonstIR install, Mike Rhodes, 19:26
Re: [TowerTalk] the archives, paul, 17:26
[TowerTalk] Archive indexes, paul, 15:45
[TowerTalk] MonstIR install, K7LXC, 13:16
[TowerTalk] [antenneX] New Antenna CD Double Pack Released - 1700+Articles, K7LXC, 13:05
Re: [TowerTalk] fiberglass tubing, paul, 13:01
[TowerTalk] fiberglass tubing, Glenn Rattmann, 10:49
[TowerTalk] 80 meter four square, Peter, 10:03
[TowerTalk] 40 meter beam info thanks, Peter Voelpel, 09:01
[TowerTalk] Director becoming a rotatable dipole, Timothy A. Holmes (W8TAH), 00:02

June 17, 2005

Re: [TowerTalk] Re Source of Aluminum Tubing for Antennas, ny6dx, 18:38
[TowerTalk] Mast Bearing, George & harriette Staudacher, 18:01
[TowerTalk] raising a crankup with ginpole: calculating forces, George & harriette Staudacher, 18:01
[TowerTalk] Parts order from Cushcraft, M. Kent Miller, 17:17
[TowerTalk] Antennas and XYLs, nd8l@juno.com, 08:41
[TowerTalk] RE : paint or not, hermans, 05:02
Re: [TowerTalk] TowerTalk Digest, Vol 30, Issue 57, G3rzp, 03:09
Re: [TowerTalk] [Elecraft] Al Kahn, K4FW, Silent Key, Sandy, 00:16
[TowerTalk] HDX-555 Tilt-Over Pulleys, Brian Maynard, 00:16
[TowerTalk] paint or not, Michael J. Castellano, 00:16
[TowerTalk] TRX80 Raising fixture and T Base, F. Davis, 00:16

June 16, 2005

[TowerTalk] folded radials, Dinsterdog, 22:46
[TowerTalk] Aluminum Tubing, jim fox, 21:13
Re: [TowerTalk] 40 M beam suggestions, Mike Newman, 21:10
Re: [TowerTalk] RE : To paint or not..., bob finger, 20:42
Re: [TowerTalk] RE : To paint or not..., Cqtestk4xs, 20:06
Re: [TowerTalk] RE : To paint or not..., Jim Lux, 18:42
Re: [TowerTalk] RE : To paint or not..., paul, 18:40
Re: [TowerTalk] RE : To paint or not..., Jim Jones, 18:39
Re: [TowerTalk] RE : To paint or not..., Les Kalmus, 18:27
[TowerTalk] RE : To paint or not..., hermans, 18:20
[TowerTalk] Alliance HD-73, c_hurlbut@adelphia.net, 17:36
[TowerTalk] Re Source of Aluminum Tubing for Antennas, Barkey, Patrick M., 17:26
Re: [TowerTalk] Source of Aluminum tubing for Antennas, donovanf, 17:26
[TowerTalk] Source of Aluminum tubing for Antennas, Lee Crocker, 17:25
[TowerTalk] Used BPH25G, Ron Feutz, 17:10
Re: [TowerTalk] painting tower...a second thought why not, Keith Dutson, 15:56
[TowerTalk] painting tower...a second thought why not, Cqtestk4xs, 15:32
[TowerTalk] tower painting, Greenacres113, 15:13
[TowerTalk] Al Kahn, K4FW, Silent Key, Jim Brown, 12:46
Re: [TowerTalk] Sources of Irrigation tubing for 40m vertical, Kyle Chavis, 12:16
Re: [TowerTalk] Source of Aluminum tubing for Antennas, Jeff Stai WK6I, 11:34
Re: [TowerTalk] Sources of Irrigation tubing for 40m vertical, douglas . snowden, 11:33
[TowerTalk] Re Source of Aluminum Tubing for Antennas, Roy Thistle, 11:19
[TowerTalk] Cablewave hardline question, Charles Johnson, 10:50
Re: [TowerTalk] Source of Aluminum tubing for Antennas, Reicher, James, 10:44
Re: [TowerTalk] To paint or not..., Reicher, James, 10:40
[TowerTalk] irrigiation tubing?, Dennis A. Homerick, 10:29
Re: [TowerTalk] Source of Aluminum tubing for Antennas, Jim Lux, 10:14
Re: [TowerTalk] Source of Aluminum tubing for Antennas, Kelly Taylor, 09:55
[TowerTalk] Source of Aluminum tubing for Antennas, Lee Buller, 09:19
Re: [TowerTalk] 40 M beam suggestions, GALE STEWARD, 08:07
Re: [TowerTalk] elevated verticals....radial config., Tom Rauch, 06:58
Re: [TowerTalk] 40 M beam suggestions, Ian White GM3SEK, 02:09
Re: [TowerTalk] 40 M beam suggestions, Dino Darling, 01:39
Re: [TowerTalk] To paint or not..., paul, 00:32

June 15, 2005

[TowerTalk] Force 12 EF180 (80m Rot Dipole) Opinions Wanted, StellarCAT, 23:39
Re: [TowerTalk] Antenna Survivability, Jim Lux, 23:02
[TowerTalk] Antenna Survivability, WarrenWolff, 22:40
Re: [TowerTalk] TowerTalk Digest, Vol 30, Issue 52, WarrenWolff, 22:23
Re: [TowerTalk] To paint or not..., Cqtestk4xs, 22:17
[TowerTalk] To paint or not..., robertsmg, 22:13
[TowerTalk] mast clamp report (was: installing monster mastsintowers(and?twothrustbearings)), JC Smith, 20:00
[TowerTalk] 40 M beam suggestions, kk9a, 19:29
Re: [TowerTalk] Anti-climb for HyTower?, Tim Duffy K3LR, 16:38
[TowerTalk] 40 M beam suggestions, kk9a, 15:44
Re: [TowerTalk] 40 meter beam info thanks, SJ W3TX, 15:25
[TowerTalk] Anti-climb for HyTower?, Jim Rhodes, 15:16
[TowerTalk] 40 meter beam info thanks, Dave Fuller, 14:42
Re: [TowerTalk] 40 M beam suggestions, Dino Darling, 13:44
[TowerTalk] [Fwd: 40 Meter beam suggestion], Dave Fuller, 13:13
Re: [TowerTalk] 40 M beam suggestions, Dino Darling, 12:06
Re: [TowerTalk] TA-33 Jr. SWR curve, K4SB, 00:32

June 14, 2005

Re: [TowerTalk] 40 M beam suggestions, Tim Kass, 23:04
[TowerTalk] Needed in SW (AZ/NM/so-CA) R45 sections, StellarCAT, 22:45
[TowerTalk] Help in docs for Rotating Tower System (RTS)!!, StellarCAT, 22:42
[TowerTalk] 40 M Beam, Jim Idelson, 22:18
[TowerTalk] 40 M beam suggestions, WD4K, 19:22
[TowerTalk] Hardline, skip, 19:11
[TowerTalk] Mast Bearing, Peter, 18:53
Re: [TowerTalk] TA-33 Jr. SWR curve, Jim Lux, 17:51
Re: [TowerTalk] 40 meter beam input, Keith Dutson, 17:03
Re: [TowerTalk] TA-33 Jr. SWR curve, paul, 16:04
Re: [TowerTalk] Small HF Yagi, Jeff Stai WK6I, 15:34
Re: [TowerTalk] TA-33 Jr. SWR curve, Jim Lux, 15:07
[TowerTalk] 40 meter beam input, Dave Fuller, 14:52
Re: [TowerTalk] pl-259 lmr-600, Bill Aycock, 13:31
[TowerTalk] supporting a truss with a fence post gate clamp, FireBrick, 13:25
Re: [TowerTalk] TA-33 Jr. SWR curve, paul, 13:19
Re: [TowerTalk] pl-259 lmr-600, Keith Dutson, 11:27
Re: [TowerTalk] [Antennas] saw some new roof/ground mounts today, Ed Tanton, 11:14
[TowerTalk] TRX80 Raising Fixture + T Base for TX455, Frank Davis, 11:13
[TowerTalk] pl-259 lmr-600, Merlin-7 KI4ILB, 11:13
Re: [TowerTalk] C31XR Truss Mounting, Dave W7DPW, 11:13
Re: [TowerTalk] TA-33 Jr. SWR curve, Keith Dutson, 11:09
[TowerTalk] TA-33 Jr. SWR curve, Neal Sacon, 09:53
[TowerTalk] HyGain LP-1009, Bryan W5KFT, 07:31
Re: [TowerTalk] elevated verticals....radial config., VR2BrettGraham, 01:36
[TowerTalk] TA-33 Jr. SWR curve, Neal Sacon, 01:06
[TowerTalk] elevated verticals, hcawthra, 00:05

June 13, 2005

Re: [TowerTalk] elevated verticals....radial config., K4SAV, 23:19
Re: [TowerTalk] elevated verticals....radial config., Gedas, 21:14
Re: [TowerTalk] a really big falling derrick tiltup (104 meter), Jim Lux, 19:37
Re: [TowerTalk] elevated verticals....radial config., Tom Rauch, 17:53
[TowerTalk] HF6V elevated, Steve K4FJ, 17:25
[TowerTalk] a really big falling derrick tiltup (104 meter), knormoyle, 17:12
Re: [TowerTalk] Getting ground rods OUT, Robert_Redoutey, 16:22
Re: [TowerTalk] elevated verticals....radial config., Rod Elliott, 15:47
Re: [TowerTalk] Getting ground rods OUT, Eugene Jensen, 15:32
Re: [TowerTalk] elevated verticals....radial config., GALE STEWARD, 15:15
Re: [TowerTalk] elevated verticals....radial config., Terry Conboy, 15:15
Re: [TowerTalk] elevated verticals....radial config., Jim Lux, 14:44
Re: [TowerTalk] elevated verticals....radial config., Tom Rauch, 14:22
[TowerTalk] Small HF Yagi, Dick, WN3R, 13:51
Re: [TowerTalk] Chain and cable safety, GALE STEWARD, 13:18
Re: [TowerTalk] elevated verticals....radial config., Jim Lux, 12:48
Re: [TowerTalk] elevated verticals....radial config., Terry Conboy, 11:28
Re: [TowerTalk] Chain and cable safety, kb9yku, 11:25
[TowerTalk] GROUND ROD REMOVAL, TOMMY HALIBURTON, 09:12
Re: [TowerTalk] C31XR Truss Mounting, Keith Dutson, 09:02
[TowerTalk] Chain and cable safety, Roger Halstead, 08:30
[TowerTalk] C31XR Truss Mounting, Dave W7DPW, 08:30
[TowerTalk] Chain and cable safety, Roger K8RI on Tower, 01:57

June 12, 2005

Re: [TowerTalk] Questions about an old TH6DXX, Roger K8RI on Tower, 23:50
Re: [TowerTalk] elevated verticals....radial config., W4ZW, 23:00
Re: [TowerTalk] TA-33 Jr. element spacing, Neal Sacon, 22:38
Re: [TowerTalk] Questions about an old TH6DXX, Hisashi T Fujinaka, 20:57
Re: [TowerTalk] gnd rod extraction--coda, Tom Anderson, 20:55
Re: [TowerTalk] gnd rod extraction--coda, Gedas, 20:55
[TowerTalk] elevated verticals....radial config., Jim Jarvis, 20:52
[TowerTalk] gnd rod extraction--coda, Jim Jarvis, 20:45
[TowerTalk] Questions about an old TH6DXX, Hisashi T Fujinaka, 20:28
Re: [TowerTalk] Getting ground rods OUT, Dino Darling, 19:19
[TowerTalk] Elevated & Ground radials, WD4K, 18:23
[TowerTalk] Yagi separation distance, Dave Cook, 17:59
Re: [TowerTalk] Getting ground rods OUT, Tom Anderson, 17:55
Re: [TowerTalk] Getting ground rods OUT, Bill Aycock, 17:43
[TowerTalk] Andrews LDF4-50B Hardline Direct Burial?, Rich Hallman - N7TR, 16:01
Re: [TowerTalk] Copper pipe for ground rods?, Dale Martin, 15:10
Re: [TowerTalk] tower mounted vertical, Dale Martin, 15:10
Re: [TowerTalk] TA-33 Jr. element spacing, Tom Anderson, 14:41
Re: [TowerTalk] Copper pipe for ground rods?, Tom Anderson, 14:36
Re: [TowerTalk] Ground Planes vs. ground mounted verticals, Tom McAlee, 14:27
[TowerTalk] ground rod extraction, Jim Jarvis, 14:19
Re: [TowerTalk] Getting ground rods OUT, paul, 14:09
[TowerTalk] saw some new roof/ground mounts today, FireBrick, 14:05
Re: [TowerTalk] Getting ground rods OUT, David Robbins K1TTT, 14:04
Re: [TowerTalk] Elevated Verticals, Terry Conboy, 14:02
[TowerTalk] TA-33 Jr. element spacing, Neal Sacon, 13:56
Re: [TowerTalk] Getting ground rods OUT, Roger K8RI on Tower, 13:39
Re: [TowerTalk] Getting ground rods OUT, Gene Smar, 13:38
Re: [TowerTalk] Difficult ground rod installation, George Lee, 13:23
Re: [TowerTalk] Getting ground rods OUT, Cqtestk4xs, 13:17
Re: [TowerTalk] Getting ground rods OUT, Buck - N4PGW, 13:12
Re: [TowerTalk] Getting ground rods OUT, Joe - WDØM, 13:08
[TowerTalk] Getting ground rods OUT, Jim Jarvis, 13:04
[TowerTalk] CY9SS - Medical Evacuation, J. T. (Mitch) Mitchell, 13:04
[TowerTalk] Ground Planes vs. ground mounted verticals, Jim Jarvis, 12:40
Re: [TowerTalk] Copper pipe for ground rods?, Roger K8RI on Tower, 12:09
Re: [TowerTalk] Copper pipe for ground rods?...YES, Bob Eslaire, 11:59
[TowerTalk] Copper pipe for ground rods, ABowenN4OO, 11:38
Re: [TowerTalk] elevated vertical, Joe Subich, K4IK, 10:30
Re: [TowerTalk] Copper pipe for ground rods?, Cqtestk4xs, 10:24
Re: [TowerTalk] Elevated Verticals, Cqtestk4xs, 10:23
Re: [TowerTalk] Copper pipe for ground rods?, Gedas, 10:17
[TowerTalk] elevated vertical, Jim Jarvis, 09:50
[TowerTalk] Elevated Verticals, ABowenN4OO, 09:41
Re: [TowerTalk] Copper pipe for ground rods?, Buck - N4PGW, 02:49
Re: [TowerTalk] tower mounted vertical, Dinsterdog, 01:42
Re: [TowerTalk] tower mounted vertical, paul, 01:19

June 11, 2005

[TowerTalk] Info on F12 yagi..., StellarCAT, 22:13
Re: [TowerTalk] tower mounted vertical, Terry Conboy, 21:21
Re: [TowerTalk] Copper pipe for ground rods?, k6el, 20:54
Re: [TowerTalk] tower mounted vertical, Tim Kass, 20:04
[TowerTalk] tower mounted vertical, hcawthra, 19:57
Re: [TowerTalk] installing monster masts in towers(and, Craig Sande, 17:55
Re: [TowerTalk] Copper pipe for ground rods?...YES, JC Smith, 17:10
Re: [TowerTalk] Copper pipe for ground rods?...YES, Ian White GM3SEK, 16:35
Re: [TowerTalk] Copper pipe for ground rods?...YES, JC Smith, 13:52
Re: [TowerTalk] installing monster masts intowers(and?twothrustbearings), JC Smith, 13:27
Re: [TowerTalk] installing monster masts in towers(and?twothrustbearings), K4BEV, 11:11
Re: [TowerTalk] installing monster masts in towers(and?twothrustbearings), Kirk, 09:12
Re: [TowerTalk]installingmonstermasts intowers(and ?twothrustbearings?), David Robbins K1TTT, 07:09
Re: [TowerTalk] Copper pipe for ground rods?...YES, Cqtestk4xs, 06:42
Re: [TowerTalk] Copper pipe for ground rods?, JC Smith, 03:55
Re: [TowerTalk] installing monster masts in towers -- Correction, Roger K8RI on Tower, 03:33
Re: [TowerTalk] installingmonstermasts intowers(and ?twothrustbearings?), Dick Green WC1M, 03:27
Re: [TowerTalk] installing monster masts in towers(and ?twothrustbearings), Dick Green WC1M, 03:08

June 10, 2005

[TowerTalk] Copper pipe for ground rods?, Alan NV8A (ex. AB2OS), 23:24
[TowerTalk] Dual Dimensional Slider (DDS) Antenna??, David Thompson, 22:29
[TowerTalk] Warning MFJ 269 (and maybe 259) manuals (distance tofault), Tom Rauch, 19:28
Re: [TowerTalk] installingmonstermasts intowers(and ?twothrustbearings?), JC Smith, 19:06
Re: [TowerTalk] FS: Two M2'd 6M7JHV's *Sold*, Rich Hallman - N7TR, 15:33
Re: [TowerTalk] installing monstermasts intowers(and ?twothrustbearings?), Jim Lux, 15:02
[TowerTalk] OT, 9mm bolts, JC Smith, 14:37
Re: [TowerTalk] installing monstermasts intowers(and ?twothrustbearings?), JC Smith, 13:53
Re: [TowerTalk] installing monster masts in towers -- Correction, Alan NV8A (ex. AB2OS), 13:52
[TowerTalk] FS: Two M2'd 6M7JHV's, Rich Hallman - N7TR, 13:46
Re: [TowerTalk] installing monster masts in towers (and ? twothrustbearings), ersmar, 12:54
Re: [TowerTalk] installing monster mastsintowers(and? twothrustbearings), David Robbins K1TTT, 12:42
Re: [TowerTalk] installing monster masts intowers(and? twothrustbearings), Jerry Muller, 12:27
Re: [TowerTalk] installing monster masts intowers(and ?twothrustbearings?), Michael Keane K1MK, 12:22
Re: [TowerTalk] installing monster masts in towers(and? twothrustbearings), Alan NV8A (ex. AB2OS), 12:05
Re: [TowerTalk] installing monster masts in towers (and ? twothrustbearings), ersmar, 10:44
Re: [TowerTalk] installing monster masts in towers (and ? twothrustbearings), K7LXC, 08:47
[TowerTalk] Middle thrust bearing between rotor and top plate, Mark ., 07:45
Re: [TowerTalk] installing monster masts in towers(and ?twothrustbearings), Roger K8RI on Tower, 03:38
Re: [TowerTalk] installing monster masts in towers(and ? twothrustbearings), K7LXC, 01:31

June 09, 2005

Re: [TowerTalk] Yaesu G-2800 Control box, Keith Dutson, 16:20
Re: [TowerTalk] Yaesu G-2800 Control box, Doug Rehman, 16:05
Re: [TowerTalk] Yaesu G-2800 Control box, Keith Dutson, 15:47
[TowerTalk] Yaesu G-2800 Control box, N3ONM, 15:14
Re: [TowerTalk] TT birthday?, K4SB, 14:11
[TowerTalk] Looking For Rohn 55G, Keith Dutson, 13:44
Re: [TowerTalk] TT birthday?, Mark ., 13:12

June 08, 2005

Re: [TowerTalk] installing monster masts in towers, Roger K8RI on Tower, 22:26
[TowerTalk] raising a crankup with ginpole: calculating forces, Kevin Normoyle, 21:57
Re: [TowerTalk] Falling Derrick Tower erection, Kevin Normoyle, 21:03
[TowerTalk] installing monster masts in towers, tower, 20:54
[TowerTalk] mast/motor loading, WD4K, 17:54
Re: [TowerTalk] TowerTalk Digest, Vol 30, Issue 31, G3rzp, 14:59
Re: [TowerTalk] installing monster masts intowers(and ? twothrustbearings?), Jerry Muller, 14:51
Re: [TowerTalk] installing monster masts in towers(and ? twothrustbearings?), Jim Lux, 14:36
Re: [TowerTalk] installing monstermastsintowers(and ? twothrustbearings?), Keith Dutson, 14:33
[TowerTalk] monster mast, Jim Jones, 14:26
Re: [TowerTalk] installing monster masts in towers(and ? twothrustbearings?), Gary Schafer, 12:39
Re: [TowerTalk] installing monster masts in towers, Don Moman, 12:37
Re: [TowerTalk] installing monster mastsintowers(and ? twothrustbearings?), Roger K8RI on Tower, 12:34
Re: [TowerTalk] installing monster masts in towers, Gene Smar, 12:30
Re: [TowerTalk] installing monster masts in towers(and ? twothrustbearings?), Doug Faunt N6TQS +1-510-655-8604, 12:25
Re: [TowerTalk] installing monster masts in towers, G3rzp, 12:25
Re: [TowerTalk] installing monster masts intowers(and ? twothrustbearings?), JC Smith, 11:51
Re: [TowerTalk] installing monster masts in towers (and? twothrustbearings?), ersmar, 11:47
Re: [TowerTalk] installing monster masts in towers(and ? twothrustbearings?), Alan NV8A (ex. AB2OS), 10:43
[TowerTalk] TT birthday?, K7LXC, 10:18
Re: [TowerTalk] installing monster masts in towers (and? twothrustbearings?), Alan NV8A (ex. AB2OS), 10:06
[TowerTalk] Triex Control Box Wiring & (Now), Troy Woolery, 09:51
Re: [TowerTalk] installing monster masts in towers (and ?twothrustbearings?), David Robbins K1TTT, 07:38
Re: [TowerTalk] installing monster masts in towers, Roger K8RI on Tower, 01:23
Re: [TowerTalk] installing monster masts in towers (and ? twothrustbearings?), Gene Smar, 00:16
Re: [TowerTalk] installing monster masts in towers, K4SB, 00:13

June 07, 2005

[TowerTalk] NK7U Tower info, Jack NK7J, 23:56
[TowerTalk] Masts, WD4K, 22:49
Re: [TowerTalk] installing monster masts in towers (and ? two thrustbearings?), JC Smith, 22:36
Re: [TowerTalk] installing monster masts in towers, Roger K8RI on Tower, 21:55
Re: [TowerTalk] Crankup Tubular Tower Info, Mike Newman, 21:35
Re: [TowerTalk] Shakespeare Vertical Antenna Wanted, K7LXC, 20:53
Re: [TowerTalk] installing monster masts in towers, Gene Smar, 20:35
Re: [TowerTalk] [CQ-Contest] 2005 Dayton Contest Dinner,Super Suite and Forum Wrap Up, Jim Neiger, 19:44
[TowerTalk] cb bazooka, Michael J. Castellano, 19:44
[TowerTalk] 8' Dish to good home, Roger Halstead, 19:43
[TowerTalk] spotting vertical, Michael J. Castellano, 19:43
Re: [TowerTalk] Small Yagi Advice, Dave Quick, 19:43
Re: [TowerTalk] Small Yagi Advice, Tim Kass, 19:43
[TowerTalk] Need schematic for AR-22 rotor, Randy, 19:42
Re: [TowerTalk] installing monster masts in towers, Jeff Goldman, 19:26
[TowerTalk] LPTV for sale, MLJUBILEE, 18:25
Re: [TowerTalk] installing monster masts in towers, K4SB, 18:10
Re: [TowerTalk] installing monster masts in towers, Keith Dutson, 17:53
Re: [TowerTalk] installing monster masts in towers, David Robbins K1TTT, 17:31
Re: [TowerTalk] installing monster masts in towers, ersmar, 16:44
Re: [TowerTalk] installing monster masts in towers, Jerry Muller, 15:34
Re: [TowerTalk] installing monster masts in towers, ersmar, 15:34
Re: [TowerTalk] installing monster masts in towers, David Robbins K1TTT, 15:11
[TowerTalk] installing monster masts in towers, JC Smith, 15:03
[TowerTalk] For Sale, Gregg Seidl, 13:04
[TowerTalk] Antennas,Tower FS, Byron Tatum, 11:19
Re: [TowerTalk] Antenna Questions, Keith Dutson, 10:29
[TowerTalk] Antenna Questions, K8fu, 10:02
Re: [TowerTalk] Bicep Cramping, Alan NV8A (ex. AB2OS), 07:11
Re: [TowerTalk] Some ebay humor, David Robbins K1TTT, 06:46

June 06, 2005

[TowerTalk] 2005 Dayton Contest Dinner, Super Suite and Forum Wrap Up, Tim Duffy K3LR, 23:39
[TowerTalk] Shakespeare Vertical Antenna Wanted, Tim Duffy K3LR, 23:16
[TowerTalk] US Tower, TX-472MDP & accessories For Sale, JC Smith, 22:47
[TowerTalk] 8' Dish to good home., Roger K8RI on Tower, 21:50
[TowerTalk] Cramping, WarrenWolff, 21:36
[TowerTalk] email, dennis moro, 19:04
Re: [TowerTalk] Bicep Cramping, Jack NK7J, 18:50
Re: [TowerTalk] Bicep Cramping, Joe Giacobello, 16:56
Re: [TowerTalk] Bicep Cramping, Gene Bigham, 16:55
Re: [TowerTalk] Bicep Cramping, Roger K8RI on Tower, 16:52
[TowerTalk] Some ebay humor, Jack - K4WSB, 16:43
[TowerTalk] EZNEC File for 40-2CD, k2qmf, 16:38
Re: [TowerTalk] Bicep Cramping, Dick Green WC1M, 16:35
Re: [TowerTalk] Bicep Cramping, Tom Anderson, 16:26
Re: [TowerTalk] Bicep Cramping, Keith Dutson, 16:22
Re: [TowerTalk] Bicep Cramping, Jack - K4WSB, 16:17
[TowerTalk] thoughts on my old-style crankup tower base pour(leveling), knormoyle, 16:15
Re: [TowerTalk] Bicep Cramping, K4SAV, 16:04
Re: [TowerTalk] Bicep Cramping, Don Havlicek, 15:36
[TowerTalk] Bicep Cramping, Mike Wetzel, 15:21
Re: [TowerTalk] Solarcon A-99 vertical, Dino Darling, 14:39
Re: [TowerTalk] Need Vertical Advice...Want to use for "spotting", J A Ritter, 14:11
Re: [TowerTalk] Need Vertical Advice...Want to use for "spotting", Jim Lux, 14:01
[TowerTalk] Solarcon A-99 vertical, Buck - N4PGW, 13:10
Re: [TowerTalk] Need Vertical Advice...Want to use for "spotting", Steve Katz, 13:00
Re: [TowerTalk] Need Vertical Advice...Want to use for "spotting", Tom Rauch, 12:54
[TowerTalk] Tips on grounding guy wires?, Charlie, 12:06
Re: [TowerTalk] Need Vertical Advice...Want to use for "spotting", Keith Dutson, 12:02
Re: [TowerTalk] Need Vertical Advice...Want to use for "spotting", Dinsterdog, 11:58
Re: [TowerTalk] Need Vertical Advice...Want to use for "spotting", R. Kevin Stover, 11:49
Re: [TowerTalk] Need Vertical Advice...Want to use for "spotting", Charlie, 11:20
Re: [TowerTalk] Small Yagi Advice, w5vx, 06:49
[TowerTalk] Need Vertical Advice...Want to use for "spotting", Aidehua, 01:21
Re: [TowerTalk] Rohn 25 stub tops, Floyd Rodgers, 00:22

June 05, 2005

Re: [TowerTalk] Small Yagi Advice, Bernard(wtrone), 22:35
Re: [TowerTalk] Small Yagi Advice, Greg Deuhs, 21:24
Re: [TowerTalk] Small Yagi Advice, Dinsterdog, 20:51
Re: [TowerTalk] Small Yagi Advice, Jerry K3BZ, 19:58
Re: [TowerTalk] Small Yagi Advice, Joe Subich, K4IK, 19:36
Re: [TowerTalk] Small Yagi Advice, Joe - WDØM, 19:20
[TowerTalk] small yagi advice, Jim Jarvis, 19:20
Re: [TowerTalk] Small Yagi Advice, Chuck Gooden, 19:10
Re: [TowerTalk] Update-NK7U, Boyd, 19:06
[TowerTalk] Small Yagi Advice, Byron Tatum, 19:03
[TowerTalk] Small Yagi Advice, kk9a, 18:51
Re: [TowerTalk] Small Yagi Advice, Joe Subich, K4IK, 18:50
[TowerTalk] Using 75 Ohm Hardline, Bill Tippett, 18:40
Re: [TowerTalk] Small Yagi Advice, Bernard(wtrone), 17:57
Re: [TowerTalk] Small Yagi Advice, Roger Huntley, 17:47
Re: [TowerTalk] Small Yagi Advice, Joe - WDØM, 17:30
Re: [TowerTalk] Small Yagi Advice, Jim W7RY, 17:13
Re: [TowerTalk] Small Yagi Advice, Bob Kellow, W5LT, 16:46
[TowerTalk] Fw: Rohn 25 stub tops, sabrams, 15:17
Re: [TowerTalk] Rohn 25 stub tops, K4SB, 15:06
Re: [TowerTalk] Update-NK7U, K7LXC, 14:53
Re: [TowerTalk] Using 75 Ohm Hardline, Tom Rauch, 14:11
Re: [TowerTalk] Rohn 25 stub tops, Blake M., 12:54
Re: [TowerTalk] Rohn 25 sections, Jim Harvey, 12:37
Re: [TowerTalk] Rohn 25 stub tops, K4SB, 12:08
Re: [TowerTalk] Where do I find insurance for my Climber?, Bob Smith, 12:07
Re: [TowerTalk] Rohn 25 stub tops, Kevin Adam, 11:45
Re: [TowerTalk] Using 75 Ohm Hardline, Gedas, 10:24
Re: [TowerTalk] Small Yagi Advice, Bernard(wtrone), 10:23
[TowerTalk] Small Yagi Advice, Byron Tatum, 09:12
[TowerTalk] Rohn 25 stub tops, Cqtestk4xs, 08:54
[TowerTalk] Walking up aluminum towers...EASY, Cqtestk4xs, 08:50
Re: [TowerTalk] Rohn 25 sections, Floyd Sense, 08:44
[TowerTalk] A warning about using tape to secure cable to the tower, Cqtestk4xs, 08:40
[TowerTalk] Rohn 25 sections, Dennis Burton, 08:29
Re: [TowerTalk] Using 75 Ohm Hardline, David Robbins K1TTT, 07:03
Re: [TowerTalk] Using 75 Ohm Hardline, Pete Smith, 06:40
Re: [TowerTalk] Using 75 Ohm Hardline, K4SB, 00:55
Re: [TowerTalk] Using 75 Ohm Hardline, K4SB, 00:44

June 04, 2005

Re: [TowerTalk] Using 75 Ohm Hardline, VR2BrettGraham, 22:47
Re: [TowerTalk] Using 75 Ohm Hardline, Don Havlicek, 22:28
[TowerTalk] Using 75 Ohm Hardline, Gedas, 21:29
Re: [TowerTalk] Aircraft Cable / Safety Line, Alan NV8A (ex. AB2OS), 19:51
Re: [TowerTalk] Boom Section assembly problem..., Roger K8RI on Tower, 18:28
Re: [TowerTalk] Aircraft Cable / Safety Line, Roger Borowski, 17:03
[TowerTalk] test, K7lay, 16:49
[TowerTalk] Boom Section assembly problem..., Rich Hallman - N7TR, 16:46
Re: [TowerTalk] Aircraft Cable / Safety Line, paul, 16:33
[TowerTalk] Aircraft Cable / Safety Line, Alan NV8A (ex. AB2OS), 14:47
[TowerTalk] Rohn winch cable replacement., KE1C - pat, 10:08

June 03, 2005

Re: [TowerTalk] AB-105 Tower, Frank Donovan, 20:15
Re: [TowerTalk] Custom Torque Arms For Rohn 55G, W0UN -- John Brosnahan, 18:35
Re: [TowerTalk] Custom Torque Arms For Rohn 55G, W0UN -- John Brosnahan, 18:16
Re: [TowerTalk] Custom Torque Arms For Rohn 55G, kb5my, 17:36
Re: [TowerTalk] Custom Torque Arms For Rohn 55G, Matt Patterson, 16:53
Re: [TowerTalk] Custom Torque Arms For Rohn 55G, David Robbins K1TTT, 16:48
[TowerTalk] Update-NK7U, Jerry Boyd, 911 Director, 16:25
[TowerTalk] R-Quad MMANA files query, juha.rantanen, 16:25
[TowerTalk] Custom Torque Arms For Rohn 55G, Hank Phillips, 16:24
Re: [TowerTalk] antenna hangover, Fred Roberts, 15:11
[TowerTalk] End feeding a half-wave vetical, Dennis O'Connor, 13:19
[TowerTalk] AB-105 Tower, wb5tuf, 12:49
[TowerTalk] (no subject), mljubilee, 12:44

June 02, 2005

Re: [TowerTalk] Rotator cable, K4SB, 23:27
Re: [TowerTalk] antenna hangover, K4SB, 23:16
[TowerTalk] rotator wire, FireBrick, 22:21
Re: [TowerTalk] Rotator cable, Phil Camera, 21:40
[TowerTalk] Trylon Titan Info, Mark - AA6DX, 20:50
Re: [TowerTalk] Universal Tower query, Don Havlicek, 19:45
[TowerTalk] Universal Tower query, Gedas, 19:17
Re: [TowerTalk] Rotator cable, Roger K8RI on Tower, 17:01
Re: [TowerTalk] Rotator cable, Matt Patterson, 16:50
Re: [TowerTalk] Universal Tower query, el34guy, 16:48
Re: [TowerTalk] Rotator cable, TexasRF, 16:44
[TowerTalk] Universal Tower query, kk9a, 16:42
Re: [TowerTalk] Rotator cable, Alan NV8A (ex. AB2OS), 16:38
[TowerTalk] antenna hangover, Jim Jarvis, 16:33
Re: [TowerTalk] Securing the cables to the tower?, Keith Dutson, 16:11
Re: [TowerTalk] Securing the cables to the tower?, Keith Dutson, 16:08
Re: [TowerTalk] Rotator cable, Phil Camera, 16:06
Re: [TowerTalk] Antenna Hangover, Jim Lux, 15:52
Re: [TowerTalk] Antenna Hangover, K7LXC, 15:43
[TowerTalk] Universal Tower query, Barry Fox, 15:34
[TowerTalk] Rotator cable, Alan Beagley, 15:33
[TowerTalk] End feeding a half-wave vetical, Tim Cotton, N4UM, 15:33
[TowerTalk] End feeding a half-wave vetical, Lee Crocker, 15:33
[TowerTalk] Antenna System Designer, Dave Kornreich, 15:33
Re: [TowerTalk] End feeding a half-wave vetical, K4SB, 15:32
Re: [TowerTalk] Antenna Hangover, K4SB, 15:22
Re: [TowerTalk] Antenna Hangover, Roger K8RI on Tower, 15:17
Re: [TowerTalk] Rotator cable, Phil Camera, 15:15
Re: [TowerTalk] Rotator cable, bob finger, 15:13
[TowerTalk] Fw: HAM-IV Info, ec1cwg, 15:02
Re: [TowerTalk] Rotator cable, Alan NV8A (ex. AB2OS), 15:01
Re: [TowerTalk] Securing the cables to the tower?, W0UN -- John Brosnahan, 15:01
Re: [TowerTalk] Securing the cables to the tower?, k1ttt, 14:42
Re: [TowerTalk] Antenna Hangover, j4976, 14:41
Re: [TowerTalk] Antenna Hangover, Alan NV8A (ex. AB2OS), 14:28
Re: [TowerTalk] Antenna Hangover, Jeff Stai WK6I, 14:23
[TowerTalk] End feeding a half-wave vetical, dennis o'connor, 14:22
[TowerTalk] Antenna Hangover, Richard Zalewski, 13:55
[TowerTalk] Old messages, K4SB, 13:53
[TowerTalk] "Don't do it, Bob", rethought, Jim Jarvis, 13:51

June 01, 2005

Re: [TowerTalk] Rotator cable, rk, 22:43
Re: [TowerTalk] Securing The Cables to the Tower, Randy Martin, 22:22
[TowerTalk] Rotator cable, Alan NV8A (ex. AB2OS), 22:13
Re: [TowerTalk] "House" Method of Raising a Tilt-Over Tower, Bob Gates, 22:12
[TowerTalk] Steppir MonstIR, Fred Mott, 22:08
Re: [TowerTalk] Securing The Cables to the Tower, Roger K8RI on Tower, 21:39
Re: [TowerTalk] Securing The Cables to the Tower, Richard Zalewski, 21:18
Re: [TowerTalk] Securing the cables to the tower?, ersmar, 19:57
[TowerTalk] Securing The Cables to the Tower, Randy Martin, 19:49
Re: [TowerTalk] Securing the cables to the tower?, Roger K8RI on Tower, 19:42
Re: [TowerTalk] Securing the cables to the tower?, Keith Dutson, 19:39
Re: [TowerTalk] Securing the cables to the tower?, Cqtestk4xs, 19:37
[TowerTalk] Steppir MonstIR, George Bennett, 19:35
[TowerTalk] Securing the cables to the tower?, Alan NV8A (ex. AB2OS), 19:12
Re: [TowerTalk] ROTATOR ADVICE, Frank Donovan, 18:59
Re: [TowerTalk] freestanding tower (not crank-up), Fred Roberts, 17:58
Re: [TowerTalk] Force12 C-4SXL query, Richard Zalewski, 17:32
[TowerTalk] MA-550MDP plus rotor base, raising fixture,TH5-DXX Avaialable, David Aronovitz, 16:25
[TowerTalk] Force12 C-4SXL query, Barry Fox, 16:25
Re: [TowerTalk] End feeding a half-wave vetical, K4SAV, 15:47
[TowerTalk] miscalculation, Jim Jarvis, 14:54
[TowerTalk] Motorized MA-550MDP Package for sale, David Aronovitz, 14:45
Re: [TowerTalk] U-Bolts for A3S, Reicher, James, 14:38
Re: [TowerTalk] End feeding a half-wave vetical, Jim Lux, 14:19
Re: [TowerTalk] End feeding a half-wave vetical, K4SAV, 14:12
Re: [TowerTalk] End feeding a half-wave vetical, Tom Rauch, 13:01
[TowerTalk] U-Bolts for A3S, Tom Martin, 12:22
Re: [TowerTalk] ROTATOR ADVICE, el34guy, 12:21
Re: [TowerTalk] ROTATOR ADVICE, Keith Dutson, 12:11
Re: [TowerTalk] ROTATOR ADVICE, Matt Patterson, 12:01
[TowerTalk] ROTATOR ADVICE, TOMMY HALIBURTON, 11:43
Re: [TowerTalk] End feeding a half-wave vetical, David Jordan, 11:36
[TowerTalk] Motor Vehicle hoiste, Gene Bigham, 11:21
[TowerTalk] house bracketing towers, Jim Jarvis, 10:52
[TowerTalk] Unsoldered Balun, Mark - AA6DX, 10:22
[TowerTalk] Fwd: Attaching Ground Braid, Martin, AA6E, 10:03
Re: [TowerTalk] house/foldover, Jim Lux, 09:53
Re: [TowerTalk] End feeding a half-wave vetical, K4SAV, 09:48
Re: [TowerTalk] End feeding a half-wave vetical, Buck - N4PGW, 09:43
Re: [TowerTalk] BAMA was Re: KLM KT34XA and 40M-3A manuals, Jim Lux, 09:37
Re: [TowerTalk] Putting the HAM-IV back together, W5PR, 07:45
[TowerTalk] House foldover AND guying tower to the house, Cqtestk4xs, 06:45
[TowerTalk] house/foldover, Jim Jarvis, 05:50
Re: [TowerTalk] A word about my X7/CC Baluns..., Blake M., 05:44
[TowerTalk] End feeding a half-wave vetical, Jim Smith, 03:25
[TowerTalk] KLM KT34XA and 40M-3A manuals, Craig Miller, 01:13
Re: [TowerTalk] Putting the HAM-IV back together, K4SB, 00:32