Towertalk
[Top] [All Lists]

Re: [TowerTalk] MonstIR install

To: Glenn Rattmann <k6na@cts.com>, Dale Martin <kg5u@hal-pc.org>,towertalk@contesting.com
Subject: Re: [TowerTalk] MonstIR install
From: Frank Hurlbut KL7FH <kl7fh@gci.net>
Date: Tue, 21 Jun 2005 17:36:02 -0800
List-post: <mailto:towertalk@contesting.com>
KL7CQ had a QST cover using a hot air baloon in the late 70's early 80's in 
Anchorage, Alaska..
73
Frank KL7FH
432 EME
16X12 ele polarity rotation
FT-847 100 Watts
preamp KA0RYT .18db NF

http://www.qsl.net/kl7fh
----- Original Message ----- 
From: "Glenn Rattmann" <k6na@cts.com>
To: "Dale Martin" <kg5u@hal-pc.org>; <towertalk@contesting.com>
Sent: Tuesday, June 21, 2005 5:30 PM
Subject: Re: [TowerTalk] MonstIR install


> At 07:57 PM 6/21/2005 -0500, Dale Martin wrote:
>
>>Hire a helicopter to come in lift and transport it to
>>the tower.
>>
>>Think a helo's far out?  There was an article in QST or CQ years ago where
>>someone did it with a hot air balloon--
>
> The hot air balloon lifts were at W7KW in Peoria, AZ and made the cover of
> CQ sometime in 1977.
>
> Several folks have used choppers as well.  Phil Ashcraft (SK) in Dallas 
> did
> it I believe, and the Texas boys will remember others.
>
> 73,
> Glenn K6NA
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>